Summary: I have a question regarding router placement and obstructions. If I centrally locate the router on the 2nd floor of my home, there will be a ceiling o...
Summary: Ok please bear with me. Yesterday had severe lag issues so did a power cycle of router, when power came back up Xbox360 and one computer would not con...
Summary: here is my observation: You have primary and child name space referances example: mf-dealing-us-prim.fxclub.com mf-dealing-us-SEC.fxclub.com Then you ...
Summary: I read this statement in a router review. WPS has been integrated and supported in Windows Vista (currently, Windows Vista only work in Registrar mod...
Summary: Putting a DSL modem in bridge mode simply means that you are turning off the built in router because you want to add your own router. How to do this d...
Summary: i have windows 2003 server as a router ...now a days while pinging in local itself its going to 50 ms sometimes.....can i change that particular netwo...
Summary: Thank you, I will try, I'm going to get a router to work on configuration, one question, can the router be wireless capable or should I use a wired ro...
Summary: I know that I should have asked my university for this question first. However, I just wanted to make sure that I go in the right way. My friend opens...
Summary: I missed the bit about running over power lines. I agree with wanderer 100% on this not being a very good method. I also don't care much for wireless...
Summary: Hi there, i have a network in the office with a server running Small Business Server 2008, 1 desktop & 1 laptop running Vista Ultimate after being upg...
Summary: I have a xp server on a lan with a router and cble modem connected. IP seg = 10.1.10.x I have a pc across the street connected to the internet via wir...
Summary: It's always a good idea, to use a router with a build in firewall. This keeps a lot of attackers away from attacking your computer directly. Antivirus...
Summary: The simple solution would be a wireless router, or since you already have a router that isn't wireless capable, an access point (AP). You could try us...
Summary: I have a router sits behind comcast modem. I want to setup the telnet access to this router from outside (public network) using the domain name. (the ...
Summary: My family is unable to get DSL due to location of our home. I have a son that wants to play X Box live and I am wondering if a wireless internet card ...
Summary: Hi, Ok I have set up an IPV6 tunnel to connect to some IPV6 only news servers. The connection works without the windows firewall on, but is blocked wh...
Summary: Hello, I have two systems set up in the office. One broadband is coming through with BT & the other is with NTL Telewest. NTL telewest has a cable mod...
Summary: OK. You have a number of problems. First issue is you put the wrong addresses in the first problem pc. The working one has 192.168.1.1 for gateway ye...
Summary: You have to connect all three to a router or a layer 3 switch. This way you can have three different subnets on the "wan" side of the router and one ...
Summary: The only way to find out is to try it. You are not going to do any damage if it doesn't work but I very much doubt if it will. As it has an Ethernet ...
Summary: Hello, I have recently purchased a BT Home Hub 2.0 i bought it because i wanted a router with printer support. I unboxed the product and read the quic...
Summary: mac address registration this is where the isp registers the mac address of your pc. You don't get an ip on the other two because they are different ...
Summary: I didn't mention I have a router sitting on top the PC also. The router does not get as hot. In terms of heat from modem, I would gauge it as not as h...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
