Summary: If you don't have to worry about the power going out, why did that happen with the first flash attempt. Why were you flashing the BIOS on a board tha...
Summary: It is moreover the south bridge chip releasing power to the rest of the system for a proper boot. You should update the BIOS on this board first of a...
Summary: I just bought a pc With intel p4c 2.4 GHz with msi 875pe neo Lsr motherboard with 256 MB kingston pc3200 cl3 ddr valueram and asus 9420 ti4800se video...
Summary: Voodoos do not work with windows XP. ECS are also a poor quality brand. Anyway clear the bios on the board, usually near the CMOS battery on the board...
Summary: hello if you keep haveing problems try shorting out the bios with jumper to reset it . and see if that helps. i had to flash a bios on new board with ...
Summary: I don't think so bert. We are talking about an original pentium 166. The BIOS on that board would be 2GB max. You can't fdisk if the drive doesn't ...
Summary: maybe a student has brought a floopy in, pop it in the A drive and ran it on your computers, with a virus infecting the bios on those motherboards and...
Summary: There is a special cable on that ATX plug that tests if it is connected to a board. If not the PSU will not start at all. And you also need to start i...
Summary: I am going to buy a new motherboard for my moms computer. I am looking at and MSI with a 1.1 Gig Celeron. What is the quality like on MSI boards. I...
Summary: Remove all add-on cards not really needed and try to reset the cmos (bios) on the board. Especially those older board can be tricky, I just had a prob...
Summary: Further to my last post Jam You will notice from time to time with bios update files can be of diff size. As stated before some manufacturers stress t...
Summary: I have a harddisk externally connected to USB2.0. How do I boot up a operatingsystem on the drive? I have Microstar MS-6167 Moherboard with latest Awa...
Summary: 1st of all, you shouldn't be running standby mode (or hibernate) on a desktop system. 2nd, have you ever updated the BIOS on your board? The final ver...
Summary: Ok The bios on that board is a little complex have another read of the manual. make sure the initial display in the bios is set up to PCIX. Make sure...
Summary: Have you enabled all IDE channels in BIOS? Some MSI boards I have used have had various 'onboard peripherals' disabled, including IDE and USB channels...
Summary: Hi I have that motherboard and processor also and it locked up on me at 133fsb so I put it dowwn to 132fsb and never had a problem since, this problem...
Summary: I have the KX18D Pro, not the II. The manual is the same for both. I can't see how its done either. Try posting that question over at amdmb.com. T...
Summary: I posted yesterday that I had a problem a new 2400+ cpu I had installed on an asus a7v266-e motherboard I've been using for about a year. I simply upd...
Summary: BTW, have you ever updated the BIOS on that board? There have been several revisions, many of them dealing with VGA issues: http://support.asus.com/do...
Summary: you're not gonna believe it, but driversdown.com had the last bios on that board, I updated it and alas, the bios now shows agp 8x as an option. and y...
Summary: Talking about Socket 7 boards? If so, I know most are eastern european sites that offer porn, a dandy virus or two, etc. For boards like Slot 1 and l...
Summary: The Drivers for Windows XP are on the WindowsXP CD-ROM. I have the same board and the sound card drivers installed during the Windows installation. ...
Summary: ive just changed to an msi board and never have i seen such a risky stupid way of updating the bios i shudder to think what might happen, anyway you c...
Summary: I have a MSI 6114 V. 1.0 dual slot one motherboard, i installed Windows XP Pro and after install device manager says theres a problem with my USB. ...
Summary: I have an MSI 694T pro board with following: 40 gig HDD,Liteon DVD,Richo CDR,Sparkle NVIDiA GeForce2MX/MX400 (64mb)and Network card with 694T Pro (MS-...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
