Summary: PLEASE HELP ME! When I unearthed my dinosaur "386-BIOS ATI VGA WONDER BIOS V4M-1.00, AMERICAN MEGATRENDS" it worked fine. Today I'm stranded. Everytim...
Summary: I thought i would take a look in the old AT case too see if any wires were lose. I noticed that the cd-rom which uses somthing similiar to a jewl case...
Summary: I am trying to setup a dual boot system with NT and Win98. I have a SCSI CDROM, that i need to install drivers for. I want to install Dos 6.22 to my p...
Summary: Hi, When I start up my , Tandy 1000 TX , it displays memory , the bios , and then it displays "Insert System Diskette and Press any key when ready" I ...
Summary: i need help with my harddisk because when i boot my computer it cant boot from the harddrive .. i changed setting in bios so i can boot froma boot dis...
Summary: Hello, I just recently acquired an old Tandy 1000 TX which still works, but there is one problem. The message "Non-System Disk or disk error. Repla...
Summary: Mick, Got PC-DOS 5.0 Bootdisk from Powerload.fsnet computer still not working. I boot with this disk and error message now says(NON-SYSTEM DISK OR DI...
Summary: Hey Guys, I have a NEC Ready 7020 Pentium 75 running Windows 3.11. I loaded RealPlayer 5.0 on to my computer and got a general protection fault which...
Summary: I HAVE A IBM APTIVA 2144 66P SL-C. IT WAS GIVEN TO ME AND I ACCIDENTLY ERASED THE PROGRAM. THE IBM LOGO STILL COMES UP BUT THEN A BLANK SCREEN SAYING ...
Summary: I have a Tandy 3000 HD with a blank hard drive. I want to eventually install windows 3.1 on it, but I think I need DOS first. I have some disks for ...
Summary: I've seen this alot on the forums but i just cannot figure it out. I'm trying to revive my old 486. So I formatted it first (a long time ago) using 'f...
Summary: I have an old 386 machine. When I switch it on the message 'non system disk or disk error' appears. I can boot it up using a system disk from anothe...
Summary: Help me, i cannot boot into c:,it comes up with NON SYSTEM DISK OR DISK ERROR, and it will only boot into 1 FLOPPY DISK, What shall I do? I need my c:...
Summary: I have installed a 1GB drive and after I format it using Format/s it wont boot. The command.com and the 3 hidden files are there but it hangs after ab...
Summary: I dont know anything about DOS, and I just got a LTE 286 from a Emory University used stuff sale. The case is cracked, but other than that its seems f...
Summary: I'm hoping someone can lead me in the right direction.. I have a 486DX dell, and I don't know much about these older systems at all.. It worked fine ...
Summary: Hello, I need help with an old 386. I formatted the hard drive which had MS DOS 5 on it and Win 3.1. I reformatted the hard drive and tried to ins...
Summary: i turn on my compaq slt 268 and it does this: 1)runs through rb numbers ok 2)says 162-system options not set-(run set up) insert diagnostic diskette i...
Summary: Here is what's on a standard 1.44M "IBM formatted" floppy disk: a little program that checks to see if two files, io.sys and msdos.sys, are located on...
Summary: Hi Steve, Thanks for fast reply Start up diskett for this model at: http://h18007.www1.hp.com/support/files/contura/us/download/8421.html when I try t...
Summary: I was boot 6.22 ver. in my 486 pc.After booting I can saw on the screen "Drive not ready","Insert Boot disk".If I use another disk massege is Non-sys...
Summary: Ok.. heres the story. I purchased a seconhand computer and the hard drive was full clogged up so a formated it. Then when i reboted the computer it co...
Summary: At the college I attend, they thru away a bunch of old ibm compatible machines. One was setting on top of the dumpster so I got it out. It has a 2.88 ...
Summary: Hi i need some help. I bought an old NBCC 386 sx Laptop when I tried it out i formatted the hard drive and found an error during boot. The error is ...
Summary: past post: i turn on my compaq slt 268 and it does this: 1)runs through rb numbers ok 2)says 162-system options not set-(run set up) insert diagnostic...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
