Summary: I had this computer lying around and it is a Midwest Micro and i want to get it working. I tested the power supply and it works perfectly. But when i ...
Summary: Something wrong somewhere, I would check your jumper settings. If you have both HDD on the same cable as master and slave, they should come up as C a...
Summary: I used to have a page bookmamred with this but ahve since lost it. I need to know the jumper settings for the 10GB Quantum Fireball series 3.5 hard dr...
Summary: Hello I have a triton 430fx motherboard. I need to disable the on-board video. Does anyone know where I can find the jumper settings? Thanks ...
Summary: Two questions: (1) if there are no other devices attached to the HDD IDE cable, does the HDD still need to be set to "Master"; and (2) I tinker with a...
Summary: i know how you all hate it when people ask questions w/out looking for the answer themselves by reading the instruction book and whatnot but i read my...
Summary: He Dears. I have a problim that i have a Motherboard of Intle company model PCIset SB82371SB/SB82437VX and a processor of Intel's MMX 200 Mghz. This p...
Summary: I have a Gainward 5VPA Rev 1.1 motherboard and i need the jumper settings as so if you could get me the site to get those settings at or e-mail me the...
Summary: As compaq presario owner, could you please advise how your jumper settings on the motherboard are arranged. As I have a compaq presario also and no b...
Summary: I have a MS-6547 w/WD 40gb hd. While trying to install XP, before it can complete, I get a blue screen. What are the basic jumper settings for MS6547,...
Summary: It's been a while since I used SCSI devices, but if memory serves, SCSI drives must be properly terminated for them to work right. If you've got a pl...
Summary: I have the driver for compaq smart-2 fast scsi controller , when i hit f6 button i specified the compaq array and the compaq smart-2 fast scsi control...
Summary: 80Pin scsi drives are known as "SCA" drives. Adaptec does make an SCA Controller card, but is VERY expensive. It's designed to hot swap the drives whi...
Summary: It was working previously with no problems so didnt really change any settings on it. i was working on it last night for a little while to see if i ca...
Summary: thats what i have right now...and it doesnt detect my scsi cdrw for some reason.. it detects the controller card but not the hd..im going to check the...
Summary: ok here is my problem a couple of weeks ago i had a problem with my computer detecting the second hardrive. it worked fine for about a year before th...
Summary: Hi! ok, I almost fried my entire system trying to get this thing to work, so now I'm asking for the kind people of computing.net I have an Initio INI-...
Summary: Am trying to revive an old 486 computer with another $1 special motherboard to which I need to set all the jumpers to configure. The motherboard is an...
Summary: My question is: Why is it that on my Maxtor 120 GB sata ata 150 it has no jumper pin...same with another Maxtor sata HD i had before as my OS Drive / ...
Summary: Hi all, A friend of mine has an old Compaq computer machine with P166 and 128 RAM. It's got 1 GB SCSI hardrive and 630 MB IDE hardrive. We are trying ...
Summary: Hi My friend has got into a bit of a mess with his pc. Does the hard drive jumper have to be set to master? Does the cd-rom have to be set as slave? ...
Summary: i have an old quantum fireball that i want to put into an old machine i have... its a 3.2 gb HDD (3200AT) problem is it doesnt have ordinary jumpers.....
Summary: Okay all here we go. A few weeks ago my CPU fried. I took my 2 hdds configured in raid 0 and put them in another machine to get some data from them. ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
