Summary: I know this is a late message but I have the same p4s8x motherboard and just ran into the same problem. Some SATA drives need a jumper that limits the...
Summary: Sorry this message will most likely be long, but I hope someone can help me. I have just put this system together and would like to install Windows M...
Summary: yeah...the sata drive is faulty...the system is an optiplex system which doesn't have additional connectors to maybe put one sata disk into another......
Summary: might want to consider making a small partition on the SATA drive and moving the page file there, while keeping the OS on the old drive. That way, you...
Summary: ok. i got a penguin gear 2.5 case, and a drive from dell, a hiatchi 2.5 notebookdrive.. its a 60GB 7200RPM drive. the case connects to my computer via...
Summary: I have an older computer with XP home on the drive and i have it all setup the way i want it. My motherboard crashed and i figured this would be a gre...
Summary: You can use either of or or both of the VIA or Promise SATA pairs of SATA drive connectors on this mboard. The VIA ones are non-RAID. The Promise ones...
Summary: Hi all, I'm hoping for a quick answer to 2 quick questions. 1. I am going to buy a SATA hard drive for my MB. To install these drives is it as si...
Summary: Thanks for all of the responses. I forgot to mention that the SATA drive is divided into 3 partitions. All files on all drives are NTFS. All 3 part...
Summary: Though I'm not familiar with that specific board......on my Asus you have to connect one sata drive to the master (sata1) and the other to the slave (...
Summary: I have a SBS 2003 server that has a RAID 5 setup with 3 U320 SCSI 36.4 GB drives. This gives me roughly 72 GB of total drive space (being that one of...
Summary: Hi hope someone can help with this problem. I have just build a new system with a Maxtor DiamondMax 10 200 gig SATA drive. The problem is that the sys...
Summary: Hi, I am looking for an adapter that will allow me to use my SATA (laptop) harddrive with my IDE (desktop) motherboard. Any suggestions ? But here's m...
Summary: I bought a SATA WD 500Gig drive and Ext enclosure to use for more storage for my Dish network DVR. I started having trouble 5 mins after starting to u...
Summary: I recently bought new SATA drive. I have noticed that it makes louder noise than my other drives (older SATA and ATA), when there's activity on that d...
Summary: I am running a system with xp pro on a sata 250 gig drive, I put in another 250 sata drive and tried to install xp64 on that to have a dual boot syste...
Summary: I just got myself a Gigabyte GA-965P-DS3, and I installed a Western Digital SATA hard drive for the main drive, with a Seagate SATA drive for backup. ...
Summary: so, if i understand, a sata drive is not the same thing as an eide ata 100? I am planning on using a soltek board with the following specs: SL-K8TPro...
Summary: Hi Daniel, I have the exact same board as you do and am running 2 SATA drives in a RAID 0 array. It isn't that difficult to set up. It is important t...
Summary: The F6 is not a boot process. It is in the installation process for windows. Unless you installed the sata drivers previously in your cloned version i...
Summary: I recently got a Maxtor DiamondMax 10 300GB SATA hard drive and a Sunway Non-RAID SATA controller. Whenever the SATA drive is accessed it causes inte...
Summary: Yes i have put in a new 3,5 drive. In fact i have tried 2 new ones as well as put in some from some other pc's without any success. I have messed wit...
Summary: Attempting to use a single SATA drive to boot\install XP(Home). I Read the manual and from various net sites took on board more tips than a bookies ru...
Summary: The motherboard *could* have a bad SATA port or controller that is causing the drive(s) to go bad. I've seen it happen with PATA drives before. I woul...
Summary: simple question. i have both sata drivers on my mobo disk and drivers i have downloaded from asus site. however there is no way of making a floppy wit...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
