Summary: I have problem with my partition that whenever I try to open it by double clikc it opens a openwith Dialogbox. but not opening directly. But I can ope...
Summary: I have added an ata controller for a 3rd hard drive. My micron tower hare 4 IDE devices already attached 2hdd and DVD ROM and CD BUrner (The burner i...
Summary: Yesterday I was chatting on my computer when all of a sudden my computer locked up for about... 3 seconds. After that, everything was fine, or so it s...
Summary: You state that you can't boot from the SATA drive. Jast assigning a drive as C does not mean it will be the boot drive. You need to set the boot seque...
Summary: Thanks for your information. As the site suggests, to run the following code in the dos mode using bootupable disk. SCANPM /ADL /CLEAN /ALL while inpu...
Summary: I hope I understand your configuration: Drive #1 c: d: Drive #2 e: If this is correct you can make the second drive d: and the second [partition on th...
Summary: XP won't let you change the drive letter of the drive that has Windows on it, but you can copy the data on the partition or the entire partition to th...
Summary: I've got issues. I have an atapi cdrom, an IDE-CD R/RW 2x2x24, and a generic floppy drive all of which are showing as not ready. I have tried to updat...
Summary: recently i installed windows xp....i hav 4 drives..C,D,E,F.I installed the XP in the C drive.I had some files in the D drive and i moved them to F....
Summary: First, I had a problem with the yellow exclamation mark next to the dvd/cd-r writer in the device manager. I found out how to delete the "upper filter...
Summary: I'm getting the message "This file does not have a program associated with it for performing this action. Create an association in the folders options...
Summary: I ve bought a sony crx185E1 cd-rw drive and it works almost perfectly. Windows Xp recognizes it an everything but with out a cd in it the eject bottom...
Summary: When I got home last night, my computer was freezing up and going extremely slow in general so I decided it must be time to reboot. When I rebooted, ...
Summary: I recently installed a slave hard drive (Seagate) The original is a Maxtor. I set the jumpers correctly to be the one with the operating system the ...
Summary: try it with only the power connector on it not the data cable, does it open now?, if not, switch to another power connector that you have verified wor...
Summary: Computer running W98. Has 2 hard drives in removable drawers. Both drives have Win 98 on them. Call drives "C" & "D". Both have jumpers in Cable Selec...
Summary: Helo , I have 2 hard drives in my computer and the 1st one is split in two parts and the second one is full,, The 1st one is C drive and e drive and t...
Summary: I had my drive "D" partitioned and formated with Partition Magic for installing Linux. I did get Linux installed (sort of) but I made a unbelieva...
Summary: I really need expert advice here. I doing a clean install and my secondary hard drive with 20 gig of family photos now shows as a 7.8gig unallocated ...
Summary: I have two hard drives in my setup, my main one is partioned for programs and other stuff (80 Gig) and the other drive I use for video capture (80 Gig...
Summary: Ok, So I have a new WD 640GB SATA Drive and Windows is not seeing it at all. I could use a hand here. Let me tell you what I HAVE done so I do not was...
Summary: Thanks v much. I would get a new disk, but for now want to save the bother of new setup. Also, lots of space on D is wasted, here's an excuse to clean...
Summary: Hi I just re-booted from cd, followed instructions on screen On screen MSI logo appears at bottom it states press TAB to switch to POST or DEL to run ...
Summary: While trying to Open my Drives C:,D:. It asks for Open with or choose a program list from.Before its was not used to come! & When I give regedit in ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
