Summary: Curt - you are definitely right I have a lot of reading to do. The only thing more right is that I should be hiring someone to do this. I just can't...
Summary: Hi I tried to follow the instruction in the guide line below (Under Netgear FVS318 V3) http://www.thegreenbow.com/vpn_gate... It worked the first time...
Summary: It will help. You had the two routers configured for separate subnets with no routing between them. Once they're both on the same subnet wireless cl...
Summary: http://windows.microsoft.com/en-US/... "And don't use ICS on systems configured for static IP addresses.: yet you have DHCP Enabled. . . . . . . . . ...
Summary: Thanks guys for your responses. I'm going to lay out my entire confusion for you. Any insight you can offer is appreciated. As I mentioned I have se...
Summary: I would like to use a Cisco VPN client with a Netgear FVS318 V3 ,,,,,I know how to configure Netgear FVS318 V3 for IPsec,,,because I am using TheGreen...
Summary: Depends on the router. Most have an option in the configuration to use https. Most users have no need for this though. -Ryan Adams Free Computer Tips ...
Summary: I have to NIC cards on SBS 2003 one NIC is for the WAN with static IP information from my ISP and is connected directly to the DSL modem, the other NI...
Summary: Hello, I have recently purchased a BT Home Hub 2.0 i bought it because i wanted a router with printer support. I unboxed the product and read the quic...
Summary: The IP address you got is a public IP from China. Routers do normally have IP addresses of 192.168.x.x. Have you checked the connection of your comput...
Summary: Hi there, i have a network in the office with a server running Small Business Server 2008, 1 desktop & 1 laptop running Vista Ultimate after being upg...
Summary: I have a router sits behind comcast modem. I want to setup the telnet access to this router from outside (public network) using the domain name. (the ...
Summary: Hi Guys; I need your help, I have a network here which have 4 computers connected & one network printer. They all operate perfectly through a normal s...
Summary: To use the internet you need to proxy the connection. The simple way is to use Analogx's free proxy application to share the internet. PM me and I'll ...
Summary: Hello, I have bought a cisco pm352 wifi card. meant to be used with an old IBM Thinkpad345CS, OS win 3.11 WFW only Onb 20MB Ram. Is there any of you...
Summary: Here is a domain. I have to install and configure network printer for all that domain. But i dont know Can tell me anyone how to install and configur...
Summary: Hi, I would like to know how to set up a network like this: Subnet A: - PC 1, PC 2, PC 3... connected with network cable to a switch. Subnet B: - PC 1...
Summary: This might sound crazy, but I am swapping out an old server for a new windows 2008 server. I have about 9 computers connected to a switch-> router...
Summary: Heres how i have this set up using Remote and Routing with windows 2008, Wan (modem) --- Server with 2 nics --- Router with DHCP turned off so that I ...
Summary: My laptop will not connect to my recently set up wireless network. However, my desktop PC using a wireless USB adapter can. I set the encryption for t...
Summary: Can someone provide an example of Routing Tables and Data Forwarding (aka software switching) for 3 networks or a link to a diagram of an example plea...
Summary: Hi i have XP Pro. i have MS publisher 2002, i also have a NAS drive with SMB server and FTP server on the NAS drive. This drive attaches to a switch, ...
Summary: I missed the bit about running over power lines. I agree with wanderer 100% on this not being a very good method. I also don't care much for wireless...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
