Summary: well before you buy anything check your board specs out on asus site. http://usa.asus.com/prog/spec.asp?langs=09&m=A7V333 the a7v333 only supports 2...
Summary: I tried overclocking for the first time and I must say it was fun. I have a xp2100 Palamino on a A7N8X-Dlx rev2 Bios 1007, with one stick of Centon51...
Summary: There is currently NO OFFICIAL DDR400 SPEC. It's still a proposed standard. The initial Barton core XP's will run at 166 FSB, and "rumors" say that ...
Summary: Yeah, that's exactly what it is. If you look at the chaintech website, they clearly imply that BOTH boards, the 266 FSB and the 200 FSB are XP compati...
Summary: Howdy - my first try at OCing thru FSB, but looking at BIOS (v. 1012), I can see the FSB listed, but it is not editable (option in advanced settings s...
Summary: How do I tell if my cpu is a model 8 or 10, thoroughbred or barton? I am about to start overclocking for the first time, so far I think I lower the m...
Summary: From an unofficial M810LMR FAQ page: Does the M810LMR take a 266 FSB or x MHz cpu? A brief motherboard and CPU guide: Version 1.6 = Support AMD Athlon...
Summary: "so theoretically, how high could i overclock an athlon xp 2200? the highest i can get it is 1.92 GHz stably" It depends on when it was made. If was ...
Summary: I have an Abit KT7A-RAID mobo. It is going in my second comp. The processor in it right now is an AMD Duron 750. I read on the Abit's site that it ...
Summary: To gain performance, do you always have to change the clock multiplier. Right now, mine is set at 5.5 and I increased the FSB to 112mhz. I changed the...
Summary: Hi All, I just bought an XP2500+ (retail), a Shuttle AN35N Ultra Mobo, and 512MB store brand (Centon) PC3200 Memory. With the default settings, the sy...
Summary: You do NOT have an 3200+...that's why I suggested you use CPUZ to identify your CPU. If it defaults to 1600MHz (12 x 133MHz), you have a Duron 1.6GHz ...
Summary: Is there any software I can use to change my FSB settings in windows? I've tried using CPUCool, but it requires that I know the PLL # of my motherboa...
Summary: Hey i was wondering what is the normal setting for the xp 1800 FSB, right now mine is at 133 when running at 1.5 ghz. Is 133 the normal setting? Than...
Summary: 1st of all, there is no 2200 Barton...unless that's a typo & you meant 3200+ Barton which is supposed to run at 2200mhz? But since you said it "should...
Summary: in my bios,i think the option to increase my fsb is under clock speed ( i take it thats the one) anyway its set at default 100mhz, and it has options ...
Summary: Hello, During a recent lan party I was found to having the slowest desktop there, that was at least working...;) Anyways, my system specs are as follo...
Summary: I have 2100+ 266Mhz FSB (obviously) and Corsair DDR400. Right now I have FSB at 133 and the ram at 133. I already know running the ram at 200 is dum...
Summary: Hi, sorry if I have posted so many times but I am rather interested to see what cpus my board will actually take... currently, my board's bios states ...
Summary: We just went over this recently...CPU support for this board depends on the board revision. If your XP1700+ is a Thoroughbred though, you're out of lu...
Summary: ok ill describe this the best i can, i know a little about computers, but apparently not enough. got a new motherboard, put my old ram and cpu in it, ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
