Summary: Found this while trying to solve the same problem. Easy networking with OS/2 Yes, it's even easier than you thought! Networking OS/2 isn't black magic...
Summary: I have an IBM NetVista. When I boot the computer I either get a 1762 Configuration Change, 162 Configuration Change, or 1780 Hard Disk Error, message...
Summary: everytime I try to boot os/2 1.0 or 2.1, from a boot disk, it gives me this error: trap 0000 a bunch of memory dumps The system detected an internal p...
Summary: I am trying to install OS/2 Version 4.5. I managed to load from the diskette 1, 2 but at diskette 3, error message occur. Have anyone encountered the ...
Summary: Hello Here is the senario: There are 2 servers, Primary and Standby Server. Both are connected through a high speed cable using a Vinca StandbyServer ...
Summary: Hi! I have a machine running OS2/Warp 3.0 that needs to be able to access data on a NT Server 4.0 and vice versa. From the OS2 i can ping the NT Serve...
Summary: what can I do non-system disk or disk error replace and strick any key when ready i doen't recognize the c: drive i boot whit bootdisk 95 no success. ...
Summary: Hi Guys, I need u r help, When I'm trying to connect for Ibm Os/2 client to Windows nt server , I can login succesfully , but when I try to connect t...
Summary: after what seems about 1/2 way through the boot process, i keep getting a cmos parity error, I replaced the motherboard, and I am getting the same thi...
Summary: I seem to be running into a lot of trap 000e errors when browsing the Internet. This is a very frustrating situation, since the only correction is to...
Summary: Warp4 no fixpacks P100 on Tyan Tomcat MB I've been trying to remove Xfolder by using the install.cmd. However, when I run it I get a SYS 2070 error w...
Summary: I just installed the operating system. On the first boot-up, I'm getting quite a few errors in the config.sys file. Such as the files os2dasd.dmd an...
Summary: I am recieving a SYS0005 error when I attempt to open a native file to read. Also I am looking for a NT client to attach an os/2 workstatoin - if any ...
Summary: get 3 errors on startup saying the following files aren't valid device driver files c:\mptn\protocol\sockets.sys c:\mptn\protocol\afos2.sys c:\mptn\pr...
Summary: i was getting TRAP 000e problem when ever i tried to boot my os/2 warp ver 3 system. But after doing rem the following line DEVICE=C:\OS2\MDOS\VCOM.S...
Summary: Hi when i boot warp 4.5 i become a doscall1.dll error : a program in this session encountred a problem and cannot continue. c0000005 doscall1.dll 0003...
Summary: Hello. I Have a OS2 Ver.2.1. But, Diskette 1 was failed. If insert #1 Diskette(for install), occurs error message. 'The system detected an internal pr...
Summary: Hi, I'm using an OS/2 v4 client to logon to a Windows NT4 server. An external expert configured our OS/2 clients and it work fine for more than one ye...
Summary: The controller locks up intermittently on morning boot with the following: EXCEPTION IN DRIVER :A: TRAP 000d ERRCD=00 ERACC=**** ERLIM=******...
Summary: On a OS/2 Warp machine I get an SYS3175 error during startup. It seems to be while executing FFST.EXE. How can I solve this problem? Nothing has been ...
Summary: hello I hope someone can help me with my problem I was installing my new usb cd burner and i was following the install wizards instructions when it as...
Summary: Get this. SP3 for W2K on D: partition failed, thus causing havoc when trying to use W2K Repair off CD. I then go and try to clean off W2K and then re...
Summary: every time when i turn on my computer,this message pops up "DW has caused an error in DW.EXE. DW will now close". any one who know email back at kevin...
Summary: I'll answer my own question. "Easy networking with OS/2 Yes, it's even easier than you thought! Networking OS/2 isn't black magic like many people thi...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
