Summary: right mouse clieck on My Network Places and choose properties. Right mouse click you lan connection and select properties. Go down to tcp/ip, double...
Summary: HELP! i have a laptop and somehow i screwed up my ip address and can't get on it now i'm attached via ethernet. and no http://192.168.0.1 or http://1...
Summary: If my server is down then the clients will not have access to the internet right?, I am not using an external router and I am not planning to unless I...
Summary: Yes, use a Class C Private IP address like 192.168.x.x. That will give to up to 255 private IP addresses. More than enough for most home users. 10....
Summary: It appears that I am going to need to start using VLANs but I have no idea where to start. This is what I have going on: 2 Outer Offices - I've read ...
Summary: Wait so...on the problem computer - the internet does work SOMETIMES, but randomly drops - or it never works?? And regarding the other post - have you...
Summary: Got a bet going with my sister. I say you can't set up a wireless connection in my house without having a 'tethered' pc to set up the router. I have a...
Summary: If there is a problem with the switch, your wall plug is connected to, you might not get a link and in that case, you have no connection to the server...
Summary: which means you have entered a static ip address but forgot to give this entry the gateway ip. Either put the gateway ip in or set to obtain ip addres...
Summary: In the road of 30 km at every 2 km there should be telephone , CCTV,VMS, siren,etc. Also there should be one control room in between.I need to set up ...
Summary: Goto the Start / Control Panel / Network Connections. Rightclick your Local Area Connection and choose Properties. Then choose the properties of the I...
Summary: Always examine what you believe to be fact when things are not working. How about setting a static ip at .2 on the server? bind the port 5555 to it...
Summary: I know that I should have asked my university for this question first. However, I just wanted to make sure that I go in the right way. My friend opens...
Summary: What kind of server are we talking about here, a DC, a web server, etc? Typically, a server will have a static IP address so you will need to know the...
Summary: I cant use ipconfig.. im trying to configure a static ip address for a program, but i cant use ipconfig to find out my information. Whenever i type...
Summary: Hi, Set your wireless card Internet Protocol Properties to 'Obtain an IP address automatically' and 'Obtain DNS server address automatically' and try ...
Summary: That's the way I'm set up now; modem, no router. The modem always gets the same IP address. Is this bridge or router mode? I don't know. When I want t...
Summary: Heres how i have this set up using Remote and Routing with windows 2008, Wan (modem) --- Server with 2 nics --- Router with DHCP turned off so that I ...
Summary: Thanks guys for your responses. I'm going to lay out my entire confusion for you. Any insight you can offer is appreciated. As I mentioned I have se...
Summary: I have two XP sp3 machines in my network. Data transfer between them caps at 1Mbps. This is very odd since both machines have tested at speedtest.net ...
Summary: Ok please bear with me. Yesterday had severe lag issues so did a power cycle of router, when power came back up Xbox360 and one computer would not con...
Summary: I just purchased a Belkin N+ wireless router, which has a USB connector in the back that one can connect up to a hard drive. I did that with a Seagat...
Summary: Hi, Ok I have set up an IPV6 tunnel to connect to some IPV6 only news servers. The connection works without the windows firewall on, but is blocked wh...
Summary: Hi Guys; I need your help, I have a network here which have 4 computers connected & one network printer. They all operate perfectly through a normal s...
Summary: Yes, I used my Laptop to connect to the modem. Family member didn't have computer. As far as I know no other computer has been connected to their cabl...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
