Summary: My computer currently has two IDE type ATA hard drives and one SATA/150 hard drive. The read speed of the SATA drive is extremely slow. When I burn ...
Summary: Though I'm not familiar with that specific board......on my Asus you have to connect one sata drive to the master (sata1) and the other to the slave (...
Summary: SATA is pretty flakey with Asus boards. Check the Asus support site as they have numerous posts about this including some SATA drives that simply will...
Summary: Right i have two sata drives in my pc i want to run on sata0 (raid). But when i try to install os on to them it cannot detect any drives. I have creat...
Summary: Hi all, I'm thinking about installing a couple of SATA drives in a new computer to get the RAID advantage. I've heard rumors that SATA drives don't g...
Summary: I'm going to buy a new sata drive soon and was wondering if I needed to install the sata driver during the XP installation or should I install XP then...
Summary: Hi hope someone can help with this problem. I have just build a new system with a Maxtor DiamondMax 10 200 gig SATA drive. The problem is that the sys...
Summary: How do I partitio or format a new WD sata drive? It doesn't show up in explorer...need software to do this in eigther windows or in dos. Thanks. ...
Summary: My board has two slots for normal ATA hard drives and 2 more slots for serial ATA hard drives. Right now I am using to ATA hard drives. I was wonderin...
Summary: Hi, I am looking for an adapter that will allow me to use my SATA (laptop) harddrive with my IDE (desktop) motherboard. Any suggestions ? But here's m...
Summary: I bought a SATA WD 500Gig drive and Ext enclosure to use for more storage for my Dish network DVR. I started having trouble 5 mins after starting to u...
Summary: Hello, managed to figure out about the raid bios in my other post. However, having another problem. For some reason when I enter nvidia raid bios, the...
Summary: I recently bought new SATA drive. I have noticed that it makes louder noise than my other drives (older SATA and ATA), when there's activity on that d...
Summary: I just got myself a Gigabyte GA-965P-DS3, and I installed a Western Digital SATA hard drive for the main drive, with a Seagate SATA drive for backup. ...
Summary: I recently got a Maxtor DiamondMax 10 300GB SATA hard drive and a Sunway Non-RAID SATA controller. Whenever the SATA drive is accessed it causes inte...
Summary: I am building a computer to be a print server for a wide format printer. This printer works best with Win 98SE. I have tried using it with Win XP, b...
Summary: Hi, I have a 2 hard drives in my computer an IDE ( c: ) and a SATA ( d: ). Yesterday the sata drive died. This is the second time in 6 months that a...
Summary: hey all, I just booted to my old ghost 5.1c floppy and am wanting to ghost two identical SATA drives. my problem is this: I went into BIOS and enab...
Summary: I have installed 2 SATA drives and while installing XPPro, I hit F6 and put the drivers in Drive A after it completed it asked if there were any other...
Summary: Generic question - I have an old computer and I'm upgrading pieces one by one. First step - buying new HD. Looking at a SATA II drive or its equival...
Summary: Hello. I installed a new Western Digital 80gig SATA drive. Everything expects for windows picks it up. Device manger reads it, Everest (a driver and...
Summary: Hello all-- I have a 160 GB SATA 150 drive that used to be my primary, two upgrades ago. I'd like to use it for extra storage, but... --My A7N8X mobo ...
Summary: What is the best SATA solution to maintain a clone of a hard drive? I currently have a 20 gig hard drive and would like to upgrade to a larger SATA dr...
Summary: Hi, I have an ASUS P4P800 motherboard with a 120 GB IDE hard disk drive with Win 2000 PRO installed. I also have 2 CD / DVDRW installed and I am addin...
Summary: I recently reformatted, and since then, I haven't been able to access my SATA drive. My motherboard is an ASUS A8V Deluxe. I can't figure out what co...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
