Summary: I know I formatted (cleared the hd) and put the sys restore cd in to reinstall windows wx and then the error came up. Hey Jam thanks for the oc tip I ...
Summary: Hi! My notebook is ASUS A6Ja with 1GB memory. Not long ago I decided to expand it to 2GB. As EVEREST said, I had 2 modules of 512MB brand Infineon. Th...
Summary: PC previously had Win98 on it but now needs upgrading to something better to make use of broadband. Anyway, tried installing XP & got error message p...
Summary: I agree with Richard. 128MB is very low but the 256MB SD Ram you had wasn't that good either. If you're lucky you end up at around the same speed ...
Summary: I could use some help with a couple of problems, the first is that my computer is turning itself off (it just loses power as if you had unplugged it) ...
Summary: ive got 6-3-3-2t timings and my frequency is currently set to 166mhz, I can go to 200mhz but when i benchmark, i get even slower timings. Its a matter...
Summary: The model number for RAM (PC2100, PC2700, etc) is the max amount of bandwidth capacity it can handle at it's default frequency. The numbers are rounde...
Summary: Hello everyone, Thanks for all the help I recieved about this. I had a chance to take the ram out of the laptop and check the specs for each, one at a...
Summary: One of the problems with DDR2 RAM is the high latencies. CL5 is common for "value RAM". PC2-8500 (DDR2-1066) is designed for 533MHz...but what current...
Summary: I am after a monitor which can display a horizontal frequency of 15 KHZ for an old pc which uses a standard 15 pin VGA connecter. Any one have any id...
Summary: I thought EVERYONE knew this stuff by now! Do the math. Your AXP 3200+ runs at 2.2GHz (aka 2200MHz) with a multiplier of 11x. The multiplier is locked...
Summary: Tried to add 64MB (pair) in Packard Bell Axcel 3510 which had 4x4MD (one upright & 1 at angle)+ 2x16MB already = Total 40MB. Removed the 4"s & put the...
Summary: "is the motherboard memory controller really so inefficient that it makes DDR2 at 533 lag severely behind DDR1 at 400?" You have to understand that te...
Summary: All the ram will run at the speed of the slowest module, but that has nothing to do with your improper total memory amount. You have a ram compatibilt...
Summary: Hey, I have a major problem with RAM. I am putting together a computer from some old parts i found. I have everything but i miss RAM. The problem is t...
Summary: "My original Power Supply is 250W and 9A on 12V - Mercury (Kobian) brand." Your mboard is relatively old. 250 watts may be fine if it is a good qualit...
Summary: Ebay generally has a lot of cheap ram available. Good quality stuff too. Most mobos that call for PC133 ram are also backward compatible with PC100 ...
Summary: My computer was running fine with 2 sticks of 256mb DDr RAM, but I wanted an extra 512 to help smooth things out when playing resource guzzling games....
Summary: Your 2.4GHz CPU runs at 100MHz, not 400MHz. Simply look at the clock settings...it's 24 x 100MHz, not 6 x 400MHz. The 400MHz number is theoretical & i...
Summary: Hi.. Its like a n00b question. I can find the slot for RAm in the backside of the laptop, but can not find the second slot, so I can upgrade it to 1GB...
Summary: Hello, I have built a few computers over the past couple of years, and I need another stick of 512MB DDR RAM. The problem is that I totally forgot wh...
Summary: From your description of the problem and the troubleshooting that you have done, my guess would be RAM. I've never run into a RAM overheating problem ...
Summary: Ok I got a Sony, PCV-RX380DC with factory original 128MB PC-800 RDRAM. Time to upgrade so I got compatable(yes, I looked it up specifically) 512MB RDR...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
