Summary: do you have any idea web site address that i can search name of company and number find more information about my 486 mother board it seem so rare to ...
Summary: A friend of mine recently gave me 40 old 386 486 motherboards all of them have the cpus and memory (30 pins simms). My question is how much "gold" is ...
Summary: Hi Jay: You might have damaged the bios or motherboard, always remove battery when PC is powered off. Try to use reset dip switch (is usually near bio...
Summary: I bought a 486 DX2 Intel 66mhz motherboard made by Opti, on Ebay last night and it has 8 simm slots, each are 30 pin slots. I was wondering what the c...
Summary: i don't think my motherboard is seeing my disk drives because i am trying to load XP por but it just sayes "boot failer insert sys disk and press ent...
Summary: IOS flash upgrades are pretty specific to the motherboard and current BIOS. They are hard to find for older computers. If you want more hard drive spa...
Summary: I think it's OK. The bootup sequence is looking for SCSI which is on the other computer. As long as you don't install another CD driver for this mot...
Summary: MSCD001 is not a file. It is just the identification tag assigned to a cd-rom. If you had multiple cd-roms the tags would be MSCD002 then MSCD003 etc....
Summary: You start at the end where the floppy cable is twisted. this is called the boot end, if you want to boot from a 5.25" then you would use the bigger e...
Summary: My old portable MCW computer won't boot up anymore. It has a 386 Intel motherboard. I think that the on-board battery is dead. It has a Varta N3310...
Summary: Erm, I've tried to lower the volume using the mixer as much as I could(if that's what you meant Michael?) for those channels although it doesn't help ...
Summary: hi brian, i had the same problem, and was very frustrated. turns out, i read somewhere on the net, that if you attach both your CD-ROM and hardrive on...
Summary: After partitioning with Partition Magic, I have 2 working systems: Win 98 and Win 3.1, CD support and everything. But Win 3.1 can't find my Soundblas...
Summary: If you are looking for Windows 3.1 svga drivers for a Sis 5595 motherboard (Sis 530 VGA) good luck. I've looked everywhere without sucess and the man...
Summary: You'll have to clear the CMOS and return it to factory defaults. Open the system case and look on the motherboard for a jumper pin group that's labele...
Summary: Hello, i have an old motherboard with eisa but no ECU for it. It's based on SiS chipset and generally is completely ancient, but since i'm keen on old...
Summary: With your computer unplugged, unplug the ribbion from your hard drive and plug it back in making sure it is seated well. You can also do this with th...
Summary: Hey moflash, i'm flattered that you're asking :) The only Paradise cards that I'm acquainted with, are the old old ones from the late 80's - the ones ...
Summary: Hi, Just a shot in the dark, but this link may be helpful to you: http://login.dknet.dk/~pho/motherboards/sis486b/motherboard.html I think the AV-75...
Summary: Hey Everyone, I just got this PC in a Gateway 2000 P4D-66 with Windows 3.11. The Motherboard seemed to have been damaged as the Keyboard doesn't work...
Summary: Yes, If you were to install 72 pin RAM in a 32 pin slot, (if it would fit in the first place), it would not be recognized by your computer, and if you...
Summary: Found the answer!!! I downloaded a boot block recovery diskette from www.microfirmware.com and installed a new copy of the original BIOS. Evidently t...
Summary: The 3 CD-ROM connectors (Panasonic, Mitsumi, Sony) are all older proprietary types of CD-ROM drives and won't work with your ACER. You need to run it ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
