Summary: I have a PC that only has HD IDE internal and USB-CDROM external. I have not any floppy. I want to restore my ghost's image from my usb-cdrom. I have...
Summary: hi i have a usb hard drive and would like to boot win98 off of it. i installed the OS and can boot fin when i remove the drive from the usb case and u...
Summary: I have a PC that only has HD IDE internal and USB-CDROM external. I have not any floppy. I want to restore my ghost's image from my usb-cdrom. I have...
Summary: So far the following DOS boot disk has worked on every system I have tried it on (3 homebrew desktops, a Dell desktop, and a Sony notebook). I found t...
Summary: 486 SX 25 mhz. We f/disked PC. Thought we had a bad I/O card. It wouldn't read the Dos boot disk to cont F/disking it. Installed a new I/O Card an sti...
Summary: I just got a used hard drive with nothing on it but the Windows 98 version of DOS. The only Windows version I had to install was Windows 3.1, so I ha...
Summary: i understand that i can run dos 7 'live' from a cd, (meaning no installation is required) I also know that you can run the 98 GUI on dos7. i Was wonde...
Summary: The BIOS must have an entry that states USB Hard Drive is a bootable device. IF and that is a big IF your BIOS is USB bootable, then using say a W98 O...
Summary: I have been trying with the help of posts read here, to boot my USN flash disk to DOS. I have a floppyless machine .I have suceeded to enable the flas...
Summary: I have 2 different USB external drives a Storix and a kangaroo drive. My problem soundslike i'm not alone in wantnng to boot from a dos floppy to ghos...
Summary: I have an HP Pavilion Notebook with a USB 2.0 PCMIA card attached to an external Iomega HDD drive, becuase my onboard usb 1.1 ports are excrucatingly ...
Summary: Here are your options: 1) Go to the manufacturer of the USB floppy drive and look for a DOS driver. If you can't find one, e-mail them. If you can't...
Summary: When I turned on my IBM/PS2 computer today I got a non system disk or disk error. I then put in a boot disk and it said the same thing. The hard drive...
Summary: More info...I'm booting from a USB CD ROM disk which creates a RAM drive and loads the USB CD ROM drivers. Once this happens, I can no longer access t...
Summary: Hi, I am a software tester, and all the test PC's have ghosts set up for each operating system and configuration. I am trying to streamline the way w...
Summary: I found the following FAQ at Canyon: It may not be 100% what you want, but may point you in the right direction... How can I set my USB Flash Drive bo...
Summary: I connected 3 USB 2.0 drives to my Dell CPxH 500 MHz PIII notebook. 2 were connected via a 2 port 2.0 PCMCIA (Belkin) and one via the internal 1.1 por...
Summary: I downloaded the DUSE USB DOS driver from www.pocketech.net. I've got the older 4.2 version and the new 4.4 version. I thought it might allow me to ...
Summary: The USBASPI.SYS Panasonic(TM) USB to ASPI driver v2.06 Reference =========== Description: File size : 37,903 bytes Last modified : 27 Nov 2002 Suppor...
Summary: hi, i am trying to boot a 64 meg USB thumb drive with network support. the disk has an MBR on it with a single Fat16 partition. i copied dos files o...
Summary: Hi I hope you can help me. I've read a few posts and noticed people getting FLAMED brutally for mentioning the 'W' word around here but my issue is o...
Summary: I want to make a cd which can be boot from the usb cdrom. below are my config.sys and autoexe.bat config.sys DOS=HIGH,UMB lastdrive=Z device=HIMEM.SYS...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
