Summary: Not really familiar with the fan above. But the Smart Fan can be adjusted with a pot to control the speed from 1300rpm to 4800rpm. Or can be auto adju...
Summary: I suspect that your RAM is running at the correct voltage because changing the RAM speed from 133MHz to 100MHz isn't gonna make up for a 0.80v overvol...
Summary: Honestly, why would anyone not overclock. Socket 7 boards are pretty common, it was only the standard for quite a while. That and the Super 7 boards...
Summary: 'bus' speed is the speed of the m-board. Ur CPU relies totally on the bus speed. The bus speed can vary from 66 Mhz - 400 Mhz. For instance, a 300...
Summary: Let me back up.... If I run my CPU at its usual speed of 1.8 I get system failures all the time under load. So I change the clock speed from 133 to 1...
Summary: I am installing a new processor in an old computer for my sister for Christmas (PII-300 to $60 PIII-500 off ebay). My motherboard (ECS Pb6x-A+) appar...
Summary: i don't know the exact model number for the PSU, but it is a generic 300 watt. as for the BIOS, i have a "hacked" ECS K7AMA bios that allows me to cha...
Summary: when using cyberlink's powerproducer 2, and the new ati mmc 9.1 (but not previous programs) the pc will lock up after a few minutes. (in the case of ...
Summary: Alright here's my problem,my CPU lately has been heating so i turned down the clock speed from 1733mhz to 1333mhz but it's still running at a high tem...
Summary: As noted by Average Joe, above, the newest version of the BIOS for the Cognac MB allows for disabling the on-board video. However, if you are installi...
Summary: Hi all. I've just made my first attempt at overclocking my PC. I'm being very cautiuos about it as I can't afford a new system at the moment. Syst...
Summary: Hi all im looking for some advise ive got a xp2400 thoroughbred on a asus a7v600 mb and i want to raise the bus speed from 133 to 200. My mb is ok to ...
Summary: Hi, I succesfully overclocked my processor in the bios by increasing the speed from 133mhz to 150mhz...windows started up fine but my motherboard prog...
Summary: Ok I have currently 3 sticks of 512mb's of ram in my computer. My motherboard is a gigabyte GA-K8NSpro socket 754. I have the bios update F13. Alr...
Summary: did the following things... decreased fsb to 143 mhz, cleaned up old deposits of compound on heatsink, cpu, Increased memory speed from 'auto' to 4:3 ...
Summary: I have a 3400+@2.6ghz. My cpu runs at about 40°C with 50% load. Would putting a fan opposite rather than a duct help to bring down the temperature at...
Summary: I goofed! After assembling a new system, I was checking settings in the Bios and decided to try adjusting the FSB speed from 100Mhz to 200Mhz. When I ...
Summary: I tried to calibrate the CPU diode using the silentpcreview article, run it at different FSB speeds from 150 to 200 Mhz. At the end of the test, the t...
Summary: I will be purchasing a new P4 on Saturday and have a little question regarding the 2.4 Ghz model. The supplier I am buying from sells 2 versions of th...
Summary: ah, I forgot... i have tried to change mi fsb speed from 133mhz to 166mhz with cpufsb and in will hang. so i hope i can raise the multiplier ...
Summary: Right Click on 'My Computer' and select properties (or press Windows + Pause / Break). The Semprons have a higher FSB than the Athlon XPs, and apart f...
Summary: Hey guys, I know many people asked the same thing but I've tried anything (except open the case). My problem is the following: I’ve got an AMD Athlon ...
Summary: Your processor may be running at a FSB of 200 instead of 266 like it is supposed to. On some mobos this can be changed in the bios - by locating a se...
Summary: Used the advice given to rectify same problem, plus upped the speed from 733 to 1100. Now runs sweetly and only gets up to 50% cpu usage instead of 10...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
