Summary: I've given up on solving my network printing problems some time ago when I got too busy with work; now that I have a few minutes, I'll see if I can co...
Summary: For a week I have been trying to install os/2 warp 4 on my virtual pc, but the printer disks are corrupt and it won't let me continue the installation...
Summary: I use OS/2 warp3 installed on my PC (under microsoft virtual PC 2007).And there are another OS/2 installed on another PC (under microsoft virtual PC 2...
Summary: I have had the same problem. I needed two parallel ports on my systems. Finally, I had to go with a JetDirect printer sharing box. If you ever find on...
Summary: My sister has a used Gateway 2000 E3000. She is having severe problems and I can't seem to figure it out. I'm really just a novice. It all seem to sta...
Summary: Figured it out. A bit different layout than Warp 4. Now for the networked printer. I must say its simpler than linux once you get use to the object or...
Summary: I log onto a OS2 server via an IBM Client in Windows 95 and 98 and print through the OS2 print server. I have now setup an NT Print Server...I can see...
Summary: I have an old 486 laptop that runs the 2.1 for windows version presently. I decided to back up the aging install disks on My windoze box with Winimage...
Summary: HP 690c drivers can be found at http://service.software.ibm.com/os2ddpak/ html/index.htm once you are in expand printers then expand the HP cat t...
Summary: Keven, The OS/2 client will need to have the printer drivers locally installed. Create a standard printer object, install the printer as if it were lo...
Summary: I am trying to setup a network connection between a PC running OS2-4.0 and a PC running WIN95. I have managed to get the TCP/IP protocol working (ping...
Summary: >>>AFTER INSTALLING A NEW PRINTER I FORGOT THE INSTALLATION DISKS INSIDE THE UNIT. WHEN I RESTARTED MY PC AGAIN I COULDNīT GET INTO WINDOWS OR MS-DOS ...
Summary: Hi, i have problem on using hp deskjet 1600c on laptop running OS/2 version 3. My problem is the first print request is ok, however the subsequent pri...
Summary: When printing from Netscape on an OS/2 platform, with the printer connected directly to the PC, there is a 30 second 'pause' before the printer starts...
Summary: I have a an os/2 warp 4/linux redhat 7.2 dual boot system networked through a netgear fvs318 firewall along with two other win xp machines. they all a...
Summary: Hi,I'm an "new-comer"who just discovered this kind of softwares,after I was given,an old set of Ast-Bravo 12 Lap-Top computer,and complete with,instal...
Summary: I need help with a printing problem. I am running proprietary software for a Mass Spec. It doesn't matter really if you know what the mass spec is. ...
Summary: I used the utility lprmon (or lpr) to add a printer. Somewhat like : lprmon add lpt2 192.168.1.40 Afterwards i was able to print to the printer with ...
Summary: You can share the Laserjet 3100 printer between a Windows NT or higher OS and Windows ME or 98 and perhaps Linux. In my configuration, the printer is ...
Summary: I am trying to setup a peer to peer network between a PC running OS2-4.0 and a PC running WIN-95. So far I managed to get the TCP/IP protocol to work ...
Summary: Normally, kernels are updated along while installing the fixpaks. I'd advice you to install the latest fixpaks available today (unfortunately, requir...
Summary: Can anybody print from Aurora to HP printers on Ethernet? It appears that Aurora have some problems Jetadmin, which was included and works just fine w...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
