Summary: I did the following settings but it is not working. eth0 connected in modem IP SETTINGS FOR eth0 IP:192.168.0.2 SUBNET:255.255.255.0 GATEWAY:192.168.0...
Summary: It does sound as though you have either a driver (module) problem or perhaps a resource (IRQ, I/O address) conflict, unless you are using DHCP and the...
Summary: I wanted to connect a Linux system with Windows LAN connection for internet. But while configuring the ethernet card through Internet configuration wi...
Summary: I had a similar error when I switched ethernet cards. The IP address was still associated with the old card. I had to delete the old card setup before...
Summary: Hi there, I have 2 network cards eth0 and eth1. I attached eth0 to my Cable modem and eth1 connected to my another machine and I set it with 192.x.x.x...
Summary: I installed Mandrake Linux 7.1 on a dual 300MHz computer. I also have another computer having Windows 2000. I have connected both of them using a be...
Summary: This all depends on the distro you are using. To temporarily assign an ip address, you can use the ifconfig command. This will only work until your n...
Summary: I have two questions: 1: I want to setup a Static IP address for the Linux box. I managed to assign an IP and subnet mask by changing the file ifcfg-...
Summary: The actual ip configuration is in /etc/sysconfig/network/network-scripts the files if-eth0 if-eth1 and such are the configs for eth0 and eth1 respecti...
Summary: Hi, I have an strenge problem. I want to use my linux box for masquerading. There is an offcial ip address (say A) on my ethernet0. There also is a p...
Summary: I'm a newbie to Linux. With that said, I have compiled a new kernel with the options I wanted. I made sure to include my NIC (3com 3c905) when compili...
Summary: I do get an ip address for both eth0 and ppp0, even when the connection is not working. Also, if I connect to the internet and then bring up eth0, the...
Summary: i am using red hat9 i had a pc with the ip 192.168.0.104 but later i changed it with 192.168.0.204 . i edited the file /etc/sysconfig/network-scriptd/...
Summary: Hey I just recently installed linux on one of my old copmuter, seemed like a fun project. All is well, except I cannot connect to the internet. I've c...
Summary: Hi Jonathan, Again. I found following statments in /var/log/syslog Are there any influence? sl0: unknown hardware address type 256 Dec 15 02:14:42 ...
Summary: G'day, Does anyone know if iptables works with ip alising? He's my situation. I want to run a linux based firewall for our small office. I want to hol...
Summary: hi all... I installed amsn ver 0.71...and it runs great in my mandrake 9. All tools and option very similar like msn messenger in m$ windows. ...
Summary: I am just delving into the world of Linux and am trying to set up a box as a server. Nothing could be simpler in my setup - starting from scratch and ...
Summary: I am using a router to share the bandwidth to my RH7.3. When I type a Virtual IP(192.168.1.x), I can access the internet, but cannot ping from other h...
Summary: Hello all, I have been trying to get online with linux for the longest time And i finally feel that i'm making progress since i have an ip address and...
Summary: Hi guys, today I try to make the problem simple. I want to combine 172.25.123.x with 192.1.1.x i use smoothwall pendolino for the linux box, using 2 N...
Summary: It worked yesterday, but this morning when booting up, it failed to bring up eth0 (Determining IP to eth0 ... failed). I thought that the network's d...
Summary: Probably anybody can help me! is there any possibility that i can get a linux system, which acts as a router for a windows client, tunnling the clinet...
Summary: First of all you are going to need to find out exactly which driver to use for your linksys network card. Try looking here: http://www.linuxdoc.org/HO...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
