Summary: how can i tell if my bios is setup properly and i am getting the 333mhz speed for my pc2700 ddr memory? and how can i tell if i am getting the full 53...
Summary: Hi, I am using a K7S5A Elitegroup motherboard. (2 Slots for DDR and 2 Slots for SDRAM). I would like to add an 512MB DDR RAM to my current 256MB DDR...
Summary: Hi All, I've searched this site for a couple of questions I have and seen that this is a reoccuring subject with very good answers but I´m still unsur...
Summary: Downloaded Everest, will run it tonight. The standard XP 2600 will probably not run on my mobo as it requires 333MHz FSB and ideally DDR memory. The M...
Summary: i installed more memory in my pc (pc2700 ddr333) this worked for a few days but then my pc turned its self off and wouldn't start again, and i was get...
Summary: Is this system for games?? well if it is you can get a motherboard Duron 1.2or3 ghz for about $70-$100 and just get like 512mb ddr memory and make sur...
Summary: For DDR memory It's always worth getting major brand such as samsung for about $8 more. Also one thing u should watch out for is memory that doesn't s...
Summary: I have some knowledge of building computers, however I had to give in and buy a complete system. I've only gone as far as to build 400fsb systems and ...
Summary: Since it's a 550 Mhz CPU, I'm guessing you need PC-100 SDRAM (PC-133 should work, too). These modules are currently available almost anywhere that co...
Summary: My question is,, My motherboard supports dual channel DDR and my cpu is 2.7 celeron with a 400 mhz fsb what memory do i use? My motherbord manual s...
Summary: I have an intel D845GBV motherboard and i want to buy memory for it. i know it takes non-ecc Pc2100, but what about "high density" and DDr memory? ...
Summary: Hi I ve got myself a new computer: P4 2.8 Gigabyte 8PE667 Ultra 2, Seagate barracuda 7200.7 HDD (RAID),Leadtek Geforce 4 Ti 4800SE, 1GB PC 2700 DDR m...
Summary: My FSB speed is 133 and my RAM clock is 266, according to the BIOS. On the box and in the manual for the board, it constantly says 'supports 333Mhz DD...
Summary: I have an abit kd7 motherboard which has 4 memory banks. It says it supports up to 3gb of ddr ram memory for pc2100 and pc2400. I'm currently running ...
Summary: They're the same thing. The card uses DDR memory...one site is listing is the actual speed (500MHz), the other is the "effective" speed (1000MHz). AS...
Summary: I will be getting an Asus A7N8X motherboard and an Athlon T-Bred 2800+. I know the motherboard takes PC3200 DDR memory, I was just wondering whether ...
Summary: The Soyo P4I865 takes Dual DDR400/333/266 memory which translates into PC2100, PC2700 PC3200 DDR RAM. Refer to this article .. http://www.ddr-memory.c...
Summary: The motherboard I want takes this: MEMORY: 3 184-PIN DIMMS FOR DDR400/333/266 UP TO 3GB; 128-BIT DUAL DDR MEMORY ARCHITECTURE(2 PIECES MEMORY REQUIRED...
Summary: The memory modules are 2 X 512 DDR 64X72 2.5V 2-2-2 Serial-PD 184 pin RDIMM made by IBM. I bought them to upgrade my memory from normal memory. When I...
Summary: Hi, I upgraded my 256MB PC2100 DDR memory to 512MB today and I am amazed at what a massive difference it has had on the performance. I didn't expect ...
Summary: The only thing my motherboard says is that it supports PC2100 DDR memory up to 2GiG. My CPU has 533MHz FSB. What speed memory should I buy?? I have on...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
