Summary: this is hard cos you've changed so much can you see the bios on the monitor starting up? like is there any output from the graphics card? you could tr...
Summary: If it is the onboard video, you would need to disable the onboard video for the pci card to work. I am not sure how to do this if you can't see the bi...
Summary: I am losing hope but have been trying to rebuild a compaq presario 4160. I blew it away and installed Windows 98 (in fact, previously I installed OS/...
Summary: Help! My computer just stopped booting up. I can only see the BIOS, then it stays there doing nothing else. I just recently added a LAN card, in addit...
Summary: "I never thought that the BIOS chip might be disabled. " The vast majority of the cards out there with floppy controllers on them cannot support 1.44m...
Summary: My 2nd hand card has 2 ports on it, but to use it I have to get to the BIOS and disable the onboard card. If you can't see the bios then you can't di...
Summary: okay now that you added "ROM programing fail" to your post, i can assure you the bios chip on the display card is misprogrammed. i wonder if you can b...
Summary: I have a computer with a bad integrated graphics card. I am trying to install a new pci card, but I can not see the bios screen to disable the on boa...
Summary: Thank you again for your input. Some notes: 1. The bios chip is, in fact, soldered onto the board. Yes, the same picture is in the manual they sen...
Summary: "...i dont have any old "serial" keyboards... " I've seen a few ancient keyboards for ancient proprietary computers (pre pentium) that use the same 9 ...
Summary: The BIOS is flashed onto its own chip, so anything you do with the hard drive or OS won't affect it. Far as I know, removing the battery won't degrade...
Summary: Hello everyone! Okay, so to get my HDTV working with my computer I had to get another regular CRT monitor first and then set the nVidia options to use...
Summary: It looks to me that there are a total of three bin files to choose from. The newer date download has two files in it. None of the files ends in a Q ...
Summary: I have just installed my other 2nd Maxtor 80GB hard-drive in my computer, I set the jumper to the Slave drive on it. It does not show, in the Bio's, D...
Summary: I could not get into the BIOS set-up so I cleared CMOS by using jumper on M6TBA motherboard. Now I can get in to bios set-up but the system does not r...
Summary: I needed to repair a flash bios that I did to one of my boards by using a different board to change the bios software so I can POST again on that othe...
Summary: So you now have ram that works fine and proper video - good. "The only thing is that is saying that there is no bios..... " "it says 'Fastrack 376 (tm...
Summary: My PC (Win 98) has a master drive (80mb) and a slave drive (80mb). Prior to a disk boot failure error yesterday, the part of the master drive was dri...
Summary: Hi, First...I am no expert. Rule! you can't fix what is not broken. Flashing the bios is done if new hardware won't work under present bios. If done i...
Summary: Petit Jean was a bit quick to say replace the board. there are several things you can check before you need to replace the board. check to see if th...
Summary: Whenever I plug a device (a PDA, a media player, a camera, etc) into a USB drive on my computer, it seems to work alright. My computer detects it, etc...
Summary: Hi all, I'm thinking of upgrading my old TB900Mhz to an amd xp 2100 but my mobo only support up to xp 2100 with palomino core. Is there anyone out th...
Summary: I have a Presario 5441. Although I can get into the BIOS via F10, I don't see anyway in the BIOS ot change the HD type(i.e auto detect, etc..) Does an...
Summary: When you say "won't recognize" that is not specific. Do you mean it is not detected in bios/setup, nor Do you mean that you can't access the drive f...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
