Summary: The reason you cannot boot from the disk is because it was not coppied correctly. It must be coppied using the DISKCOPY command for it to be an exact ...
Summary: I'm posting this in hope that it will help others. Background, i work for a large firm and look after our corporate PC image. I use sysprep so we only...
Summary: Is there a boot floppy or a boot manager like smartbootmanager (btmgr.sourceforge.net) to allow booting to a floppy disk as usual, but then being able...
Summary: I have to convert an existing DOS bootable CD-ROM script so that I can use an IOMEGA USB CD-RW drive. My existing bootable CD looks like an A: drive w...
Summary: Thanks to those who replied to my earlier post. I think I am getting closer to fixing my problem. First of all, like I said before, my BIOS won't let ...
Summary: If you've got a recurring issue with bad sectors *anywhere* on a hard disk, booting from a logical partition isn't the answer. If this is a chronic p...
Summary: I need to boot to a network using a cd. I can boot from diskette with no problem. I have tried to place this boot disk into a ramdrive, but I get the ...
Summary: I have recently reformatted my 20Gb laptop harddrive in response to a WinXP crash. The main problem lies in the fact that I cannot access the PCMCIA D...
Summary: Hi All, I can make my HDD works by this driver. I translate the README.TXT of this driver. Please refer #10959 also. ---------- "motto hairu" DOS Dri...
Summary: I simply asked you to rephrase your question: "Subject: boot from a floppy Im trying to boot my comp to a floppy. But it wont let me, i see that it is...
Summary: When I turned on my IBM/PS2 computer today I got a non system disk or disk error. I then put in a boot disk and it said the same thing. The hard drive...
Summary: > The problem is when I use either di1000dd.sys or NJ32DISK.sys the system freezes when trying to assign a drive letter. This typically happens when t...
Summary: Old 286 won't boot from C: usng dos 5 asks for disk in Drive A will boot with DOS 5 boot disk and C:\ is accessable it worked with hard disk before ...
Summary: Geppo > I got good sustained transfer rate (13MB/s) *** using Windows 2000 *** from a 2.5" HDD IBM Travelstar 40GN and a Crown Data Pocket USB 2.0 enc...
Summary: How do I get my computer to boot from the A: drive so that I can use a boot disk to install Windows? Could you please tell me the exact DOS commands?...
Summary: When am I booting from usb cdrom and loadding usbaspi.sys in config.sys all communications with cdrom is stopped. How can I boot from and access usb c...
Summary: If you have a BIOS with a boot from USB option then USBASPI is irrellevent. USBASPI is a USB driver for the USB ports under *-DOS, if the BIOS support...
Summary: Few days ago,I bought a Dell 486 machine,model 433NP and it had Win98SE installed. I decided to format the drive and install DOS7.1/Win311 on it.I hoo...
Summary: You can get a bootdisk here. If you're referring to the complete set of installation disks for MS-DOS 6.22 - that's a bit trickier, it's still copyrig...
Summary: I have a problem, the computer recognize my disk on the setup, but it doesn`t boot from the hard disk. So, i tried booting from a floppy disk, and whe...
Summary: I'm booting to DOS 7.1 from a floppy. I have a SCSI HDD as well as an IDE HDD. The SCSI ASPI drive says that it loads successfully. However, there ...
Summary: The CD-ROm runs when you boot from a startup disk? Well, if it doew, just put the driver in the \windows directory. It is named OAKCDROM.SYS. T...
Summary: I can't access the hard disk of my computer when I booted from the floppy disk. The commands such as dir,copy does not work. (They work for the A:) ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
