Summary: The battery went bad,I replased it.But still get the beeps and numbers. Will not boot from floppy. i know this type of message was posted befor. But i...
Summary: Hehe wow 5 1/4 on a laptop, that is old :P go Here and Here. Get into the Bios and make sure your laptop is booting from A:\ drive (1.44mb) first. Zyo...
Summary: I have had a problem with this old 386 i am fixing for a friend..it will only boot from a floppy so i tried installing windows 3.0 and didnt help it b...
Summary: Actually, winimage will extract all the files out of any img file onto your hard disk, if thats what you want, but in your case its no help. DOS will...
Summary: i know what rtfm means, and i assure you i allways do read it. Yes i know Calmira will not work from a floppy, i was talking about the floppy i instal...
Summary: Go into you BIOS settings, usually this is done by holding down the "delete" key during boot-up when you hear the PC "beep." I do not know what type o...
Summary: Hi steve: If your CD & floppy drive are connected to the same control board there could be somthing wrong with it (or motherboard if controlled from t...
Summary: Netscape could be having problems because you do NOT have enough RAM or virtual memory. I know from expirence that Netscape will NOT work properly if...
Summary: Your problem comes from using MS-DOS 6.22. Use Dos 7.0 or 7.1 from a Win 9x boot disk and you will be able to read the diskettes without problems. Boo...
Summary: I've created a boot disk using Windows 98on another PC. Windows 3.x and DOS 6.22 and earlier versions of DOS will not run under a computer booted wit...
Summary: I was given a free Compaq LTE Elite 4/75 computer. I placed 6.22 dos and win for work groups 3.11 on it. 1) it will not let me use the mouse or key...
Summary: Hi again Jennifer: I read other posts below, & the problem might be that the 386 PC is setup from 5.25" floppy as a:\ drive & 3.5" floppy as b:\ (it c...
Summary: Did not work....To add to information up top.It is running pheonix bios 3.10...It is seeing my 5 1/4 drive at boot up which is listed as a drive,I nee...
Summary: ok great i picked up the hard drive and installed in my computer and setup it up in my bios now the sales guy said he did not format so since i have n...
Summary: Base (or conventional) memory is the old limitation of 640K - you can read more here. Extended memory is everything over 1 Mb - what's inbetween is (i...
Summary: I have a Goldstar 386 advanced,Win 3.1, dos 6.22, Phoenix 80386 rom bois v.1.10.10. It stills runs...but I have no software disk of anykind with it, t...
Summary: "it cannot boot from my hard disk" Sure But what does it *DO* or *SAY* ? And what was the result of: format c: /s What does the BIOS say about the dri...
Summary: First, let's find out what you are working on Are you trying to say you have an IBM Thinkpad? What model is it? Most any thinkpad should be able to ...
Summary: Hi. Here's my problem. I am using Microsoft Virtual PC 2007 and I am attempting to install Windows 3.1. I have a minor problem: All I possess to do so...
Summary: As a helping hand to other users! A lot of BIOS's do not recognise CD-ROM Drives. Then you need to find and load a MS-DOS CD-ROM Driver before Windows...
Summary: Pablo, not wanting to get into the time-worn argument about just what constitutes a bootdisk, but if DOS isn't properly installed on your hard drive, ...
Summary: I just install another Hard drive in the my Compaq, but now it will not boot, If I put the old drives back in it works. I bougth this PC from a friend...
Summary: I assume you are rumming DOS and or WIN 3x. You cannot make a bootable disk by simply copying system files onto a disk. The boot sector (first sector)...
Summary: you could have a boot sector virus, i have one and it keeps me from accessing my hard drive from a boot disk if you can boot from the hard drive do it...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
