Summary: Hi, I'm looking for a new mobo to replace my s---ty intell one. I want to drop (2)5870's in it in cross fire eventually but for now want to use (2) ...
Summary: And OtH said... "Take my word for it, some cards can consume up to 20A @ 12V." Yep, and that's a card with a single gpu. A card like the 4870 X2 with...
Summary: The need for speed goes on unabated, but fulfilling that need became a bit less likely with Intel’s decision to wait until 2011 to integrate support...
Summary: Wanderer:- Actually its vista and yes I made made the raid array using the Motherboards on board sata controller Jefro:- The BIOS was not an issue in ...
Summary: "I do not agree...if it was the PSU, the BIOS has own beep code about it...it`s "Continuous short beeps"..." But what if the PSU isn't supplying adeq...
Summary: I tested the memory using windows vista disk when it says repair windows option it said all memory fine. Also I havent got a floopy drive on my other ...
Summary: to clarify --- My original system had 2 IDE connectors on the mobo and 2 hd's and 2 optical drives. I now have a new MOBO with only 1 IDE connector. (...
Summary: i have psu repalced same problem mobo replaced same problem vga onboard and vga card on both mobo's same problem and all of this with the same cpu c...
Summary: I'm not sure if this is a hardware or OS problem, but I have an IBM PS/2 model 50 that is giving me some problems. When I first got it, I had to repl...
Summary: daughter's computer stopped working. Won't boot up. Bought a new psu. Got 3 beeps when booting up with new psu. 3 beeps is memory fault according ...
Summary: also thanks everyone who replied, i expected one or 2 answers and got like 15 :) ANTEC 300 4 FANS AND COLD CATHODES ASUS M2N MX SE + AMD ATHLON 64 X...
Summary: Well I'm confused then because my connections are different. I took some pictures to help understand( Either I don't know how or computing.net does no...
Summary: Look at Skip's drawing in response 4. The holes are oriented in such a way that you can't install the PSU the wrong way. If you put it in upside-down,...
Summary: Ah, you did say what you said about DDR2-800. My bad. Anyway, I'm not all that keen fiddling with it so it probably worked out for the best plus my pr...
Summary: Make sure it's seen right in cmos/bios setup and that the drive's data and power connections are tight and in good condition. Maybe that's all it is....
Summary: Here's the skinny. Yesterday I installed Windows 7. Before doing so I use SyncBack 3.2.19.0 Free to backup my entire My Documents folder to a Fre...
Summary: Sorry because of being in a rush. It was a Win Power. I went to the shop. But, They have referred me to another premises of theirs that deals with tes...
Summary: I currently have two hard drives that I would like to replace with one larger and faster one. My original Hard drive is a 20Gig drive that now only ha...
Summary: Does it get very humid where you live? Sounds like a connection issue of some sort. High humidity can play games with connections. My mother in law ga...
Summary: i just bought an emachine: http://emachines.com/products/products.html?prod=ET1331G-03w running win7 64-bit and its running like a dream. everything i...
Summary: Dual channel is a feature of the motherboard, not the memory. As long as you have a matched pair of memory sticks & they're placed in the proper two s...
Summary: Does this work: http://support.creative.com/Product... Then on the View: Driver | Application | All click 'all'. It's the 4.2 meg stand-alone install ...
Summary: I have put in DRR2 2GB + 2GB of RAM into my computer ram slots and Windows 7 is not detecting Slot A0. It's only detecting Slot A1, please help? Slot...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
