Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Why my modem can't response
Name: jozet Date: November 17, 2006 at 00:06:46 Pacific OS: Win Xp CPU/Ram: 2.4ghz / 256mb Product: dell
Comment:
I try to connect to internet using my home modem , but i can't register my username and password..., so i decide to ping the gateway.. and i got the messange destination net unrecheable . how i am going to know what is the problem either my modem ..or my connection failed.
Name: Mechanix2Go Date: November 17, 2006 at 02:39:19 Pacific
Reply:
Assuming that the modem connects, check that TCP/IP is enabled and that DHCP is enabled. If so, you may need to call your ISP for help on other settings.
===================================== If at first you don't succeed, you're about average.
M2
0
Response Number 2
Name: jozet Date: November 17, 2006 at 03:17:06 Pacific
Reply:
Yes i got this setting on network, All of that already assigned.My DHCP, TCP/IP is enable. Is there any setup that i can try.
jozet
0
Response Number 3
Name: Mechanix2Go Date: November 17, 2006 at 03:25:53 Pacific
Reply:
At a command prompt run IPCONFIG/ALL and then ping the DNS.
===================================== If at first you don't succeed, you're about average.
M2
0
Response Number 4
Name: GregS Date: November 18, 2006 at 19:05:32 Pacific
Reply:
Every so often I get this too. Usually a reboot will cure it but sometimes not. When not, I will then make a new conncection and set it as default and it works
0
Response Number 5
Name: jozet Date: November 20, 2006 at 22:48:26 Pacific
Reply:
Sometimes it can't work,but my modem have indicator dsl signal, it will work when the signal is not blink, however it feel like crap when the dsl signal is blink. Urgh ... i also try to ping and it has reply message from dns.
jozet
0
Response Number 6
Name: jozet Date: November 22, 2006 at 22:59:24 Pacific
Reply:
Sorry guys.., my mistake that cause the adsl modem work incorrectly. I should put dsl filter after adsl splitter not from my wall phone line. That 's why i wondered my dsl indicator is always blinking , now it will work well.
"You will know it till you succesfully break the problem "
Summary: why my IE couldn't encode Chinese correctly? it used to be work well? But after I installed ciba2000, the IE couldn't work well. It is no use even I removed ciba2000. Who can help me? ...
Summary: My u.s. robotics 56k voice modem won't work (it worked on my previous installment of xp) I downloaded all of the drivers and and stuff but, after I install the modem the "modem audio device" won't ins...
0 
