Hey friends, I have a "melon scratcher" for you guys: Quite some time ago I purchased a kodak dvd325 webcam, and used it long time, without priblems. Then I built up a new one, again no problems. Finaly, I got me a third computer, and now, I cant use it on new one. You guys are seeing the spesifications. First, I install the driver, then pluf in the cam, windows finds a new usb device and gets ready to install the new device. When its about 100% of the process, it freezes the pc. Tries again, the same. Installed the new found device under "safe mod" without problems, but then when I booted again and started windows normally, pc won't start. I removed the cam, restarted windows, and then plugged the cable, again, it locks out the system. Having no problems with my old pc though! I don't know whats going on. Any help would be greatly appreciated, thank you all in advance. Sito P4 3.0 LGA775, MSI 915G COMBO MOBO, 512 MB DDR400, ONBOARD VGA, DVD,CD-WRITER, 80 GB 7200 RPM HDD

Kodak dvc325 See FAQs point 4 Also - this driver apparently works w/SP2 and may therefore be worth a look: dvc325 driver Basically it's an old camera that Kodak have ceased to support so you might be looking at buying a new one - sorry.