Hi, I've just bought a DVB-T USB tuner stick from www.ebuyer.com The device appears to install fine, but says "Cannot Render MPEG2 Demux Filter" I have an Athlon XP2200+ with 1024mb of PC3200, Xp Pro + SP2, an Abit NF7-s (Nforce2) and an Nvidia Geforce4 Ti4200 128MB AGPx8. It appears that the USB ports on my PC are not USB2.0, because I get a message saying "This device could run faster if connected to a high speed port, click here for compatible ports" When I click on the bubble, it says "High speed ports are shown in bold" yet none of the ones listed are shown in bold. My motherboard does support USB 2.0, I apparently should have 6xUSB 2.0 ports and no USB 1.1 ports. I have installed all the latest motherboard drivers and the Nforce2 USB 2.0 drivers, which seem to install fine, but I still don't seem to have any USB 2.0 ports available?? Strangely, in Control Panel->Hardware->Device manager->USB etc-> properties, the drivers all seem to be microsoft? AMD AthlonXP 2200+ Abit NF7-S v2.0 Geforce4 Ti4200 128mb 1GB Crucial PC2700 80GB & 120GB SATA HDD's SB Audigy2 ZS Enermax Noisetaker 485W

I have an NF7-S and there is an option for USB 2.0 in the BIOS. (the option is V1+1 USB, V1+1 or V1+1 & 2.0) Go into your Bios, I am not at that computer now to verify, but if still needed, I can post the exact category in the BIOS and what to change, if you haven't found it already Good luck. Abit NF8 Sempron64 3100+ - 2.6GHZ Thermaltake Big Typhoon 512 MB PC 3200 Ram Radeon 9550 @ 460/560