Hello All., Anybody Please tell me how to Configure the HP LJ 4M Printer in Nework. peeza_007

switch on the printer let it warm up and self test when it says ready on its display then: press offline so its on but offline press menu 8 times so its on aux io menu press item once then it will display cfg network = no press + button to change this to yes then press enter then press item again and select tcp/ip press enter pres item press + to select config tc/pip then press enter press item twice to bring up the first part of the ip address (ie 192)and use + to change it, then press enter to store it press item for the next part of the ip address (ie 168) use the + button to set as required and press enter to store it press item for the next part of the ip address (ie 0) use the + button to set as required and press enter to store it press item for the next part of the ip address (ie 7) use the + button to set as required and press enter to store it# press item again to set the subnet mask in the same manner (ie 255.255.255.0) after they have been stored keep pressing item till GW byte is displayed and do as above for the gateway in my case 192.168.0.1) after these chabges press item untill aux io menu is displayed then press enter one more time then press the menu button 9 times to get test menu press item once then enter once, this will print out a self test page including the configurion details which hopefully you got correct! HTH Woof Always proof-read carefully to see if you any words out.

Oh BTW, don`t forget to add the printers ip address to your firewall . . . . . . . . :) Woof Always proof-read carefully to see if you any words out.