Need help decyphering BSOD of death message.

Microsoft Windows xp professional w/serv...
September 14, 2010 at 20:04:21
Specs: Windows XP Home Edition 2002 Serice pack 3 , Quad core Intel 2.40GHZ
I keep getting a blue screen of death on this recording computer. The error reads this.


stop 0x00000050

sysaudio.sys - B58927IE base at B589000,

DateSTamp 48025beb

Ok I don't expect everyone to know what this means but if any one does you would help me greatly...If you need to ask me more questions about my system shoot...
Also if anyone could somebody tell me where I can research the meaning of the error codes that would be helpful also.

See More: Need help decyphering BSOD of death message.

Report •

September 14, 2010 at 20:24:02

Here's what Microsoft has to say about this error:

This is often a memory problem so I'd start there, especially if you've recently replaced or upgraded memory...

1. Try re-seating the ram modules or removing/swapping them to see if this resolves the error.
2. If it's not a memory fault, try re-installing audio drivers from the computer manufacturer's web site. Do NOT get your drivers from the Windows Update web site as they suggest.
3. Run a Virus scan with your AntiVirus software and run a Spyware/Malware scan with a separate program. I like Malwarebytes AntiMalware. It's free and can be obtained here:
4. Determine the manufacturer of your hard drive (check Disk Drives in Device Manager) then, download and run the manufacturer's hard drive diagnostics software to check for hard drive errors.

-- kptech

Report •

September 14, 2010 at 20:26:34
The PAGE_FAULT_IN_NONPAGED_AREA bug check has a value of 0x00000050. This indicates that invalid system memory has been referenced.

The following parameters are displayed on the blue screen.

Parameter Description
1         Memory address referenced 
2         0: Read operation
          1: Write operation
3         Address that referenced memory (if known) 
4         Reserved

If the driver responsible for the error can be identified, its name is printed on the blue screen and stored in memory at the location (PUNICODE_STRING) KiBugCheckDriver.

Bug check 0x50 usually occurs after the installation of faulty hardware or in the event of failure of installed hardware (usually related to defective RAM, be it main memory, L2 RAM cache, or video RAM).

Another common cause is the installation of a faulty system service.

Antivirus software can also trigger this error, as can a corrupted NTFS volume.

EDIT: Beaten.

Report •

February 16, 2011 at 12:30:12
thank you very much.. i did all these thing, nd i dont know which one did it , but I dont have these problems no more!

Report •

Related Solutions

Ask Question