I INSTALLED MY LITE-ON COMBO SOHC-5236V SCSI CdRom Device (DVD-CDRW) AND IT DONT WORK. I MEAN IT IS ACTIVE IN THE COMPUTER BUT IT DOESNT READ NOR OPEN NOR PLAY NOR NOTHING ANY DISK. HOWEVER I NOTICED SOMETHING ON THE DRIVE CONFIGUTATION. I EXPLAIN IN A MINUTE. Drive G: Description CD-ROM Drive Media Loaded No Media Type CD-ROM Name LITE-ON COMBO SOHC-5236V SCSI CdRom Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate Not Available SCSI Target ID 0 PNP Device ID SCSI\CDROM&VEN_LITE-ON&PROD_COMBO_SOHC-5236V&REV_R$0G\1&163A1DE8&0&000 Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 48.38 KB (49,536 bytes), 10/12/2005 3:56 PM) Drive F: Description CD-ROM Drive Media Loaded No Media Type CD-ROM Name SONY DVD RW AW-Q170A SCSI CdRom Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate Not Available SCSI Target ID 1 PNP Device ID SCSI\CDROM&VEN_SONY&PROD_DVD_RW_AW-Q170A&REV_1.70\1&163A1DE8&0&010 Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 48.38 KB (49,536 bytes), 10/12/2005 3:56 PM) IF U GUYS NOTICE BOTH MY DVD-RW AND THE DVD-CDRW ARE SCSI DRIVES BUT DE DVD BURNER SAYS ****SCSI Target ID 1**** (AND IT WORKS FINE) AND THE DVD-CDRW SAYS ****SCSI Target ID 0****. WHAT CAN I DO? IF ALSO IT SAYS THIS Name SCSI/RAID Host Controller Manufacturer Unknown Manufacturer <<<<<HERE<<<<< Status OK PNP Device ID ROOT\VIADSK\0000 I/O Port 0x000001F0-0x000001F7 I/O Port 0x000003F6-0x000003F6 IRQ Channel IRQ 14 Driver c:\windows\system32\drivers\viadsk.sys (5.0.2195.3012, 48.76 KB (49,929 bytes), 11/11/2005 11:00 AM) Name SCSI/RAID Host Controller Manufacturer Unknown Manufacturer Status OK PNP Device ID ROOT\VIADSK\0001 I/O Port 0x00000170-0x00000177 I/O Port 0x00000376-0x00000376 IRQ Channel IRQ 15 Driver c:\windows\system32\drivers\viadsk.sys (5.0.2195.3012, 48.76 KB (49,929 bytes), 11/11/2005 11:00 AM) KINDA CRAZY RIGHT??? SO IF THIS POST AINT MAKE U MAD ;)...ANY SUGGESTIONS? THANKS SO MUCH! knowing everything is realizing there is much more to learn.

Can you drop the capitals it is tantamount to shouting in forums, thankyou. Change the SCSI ID to either 2, 3, 4 or 5

I think the guy only wanted his message to be clear.Using capitals done just that.

I HAD THE SAME PROBLEM. TRY UPDATES. IT FIXED MINE! P.S. I LIKE CAPITALS TOO! If at first you dont suceed in opening a computer, get a hammer and a chisel like i do...