Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Monitor issues
Name: petermc Date: June 27, 2005 at 21:46:09 Pacific OS: XP Pro CPU/Ram: Pent 4 / 512 ram
Comment:
Purchased new printer and when I installed it the software required me to lower the screen display to 800 x 600. After completing this and rebooting there is no image on the screen??
Uhh, printers have nothing to do with screen resolutions. If you're using a lcd flat panel monitor, plug in a CRT and change it back.
Otherwise, hit the F8 key as if you were going to access safe mode, but choose "last known good configuration". That ought to switch it back. Or go into safe mode and change it back there.
0
Response Number 2
Name: yankanuk Date: June 28, 2005 at 03:46:32 Pacific
Reply:
I've never heard of a new printer requesting a lower screen display. I would suspect spy or adware or possibly a virus is causing your problem. I would follow the advice of response one and then check your PC. Good luck
Summary: My computer had been shut off for a week and when I turned it on it was very slow to boot,(this is not normal.) Also while on the Internet searching through web pages the screen would go black for a s...
Summary: My dad's computer has recently had an issue with (what I think to be) the video card. It has been an issue before, but usually with about a half an hour of futzing with the back of it, opening it up a...
Summary: Ok heres the scoop.I leave my comp on alot but not all the time. When day i left it on and came back it was off. So i turned it on. Everything was going good until the windows loading bar came off and...
0 
Xp won't start
