ibm aptiva 1253 e 35

stephen willis February 3, 2009 at 02:25:28
Specs: modem connection
i need to know how to go usb to dsl modem there is not a modem port on this is.just usab.com they make adp,that will work.for this problem??i believe it is 1.o.not sure . any help would be of great help.

See More: ibm aptiva 1253 e 35

Report •


#1
February 3, 2009 at 03:17:46
DSL or ADSL is a dedicated system for using the phone lines to connect through your ISP (phone company). A special DSL modem is needed which you can buy from local computer store or rent from the phone company. This modem can use either a USB connection or a LAN connection to your computer....depending on what you have available. There is nothing that can be done to upgrade a USB 1.1 to a USB 2.0 port.

In USB connection a designated modem port is not required any USB port will work...but it is best to not go through a hub for the internet connection!

If your computer does not have an available USB port you can use an adapter that connects to the parallel port and has a USB connection for the other end...

In reference to 11/05/2008


"So this is how liberty dies. With thunderous applause."
- George Lucas


Report •

#2
February 3, 2009 at 05:18:16
Another possibilty would be to install a PCI network card...that would give you an ethernet port to connect to. I *think* that's what you mean by "modem port".

http://www.geeks.com/details.asp?in...

Or you could install a USB 2.0 adapter card.

http://www.geeks.com/details.asp?in...


Report •

Related Solutions


Ask Question