Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
HDD LED doesn't work with sata raid
Name: nick2504 Date: May 9, 2005 at 23:55:04 Pacific OS: winxp home CPU/Ram: 3.0 / 1gb
Comment:
I just installed a PCI raid card with two maxtor drives but the hdd led doesn't work with it, I looked on the card and there's no plug for the jumper so I left it connected to the motherboard.
I'm using a Adaptec Serial ATA Raid 1210SA brand card.
Name: computingMonk Date: May 10, 2005 at 02:15:14 Pacific
Reply:
Correct me if im wrong but I think the HDD LED only works with IDE peripherals.
There are 10 types of people in the world, those who know binary, and those who don't.
0
Response Number 2
Name: computingMonk Date: May 10, 2005 at 02:16:37 Pacific
Reply:
* DIRECT IDE peripherals that is (in other words, attached directly to the mobo).
There are 10 types of people in the world, those who know binary, and those who don't.
0
Response Number 3
Name: wanderer Date: May 10, 2005 at 08:55:21 Pacific
Reply:
find the led connector on the card and move the mb drive lite connector to the card. It is per controller and with a 2nd controller you would need a second light. I sometimes use the yellow one for raid cards.
Summary: I have a GrandPrix1 steering wheel but it doesn't work with xp... do I need a driver, if so where can I find it, or do I have to buy a new one?... any kind of help will be apriciated...:)) ...
Summary: I just recently purchased an 120gb western digital sata hardrive and an sata 32 bit pci raid controller card cause my motherboard doesn't have sata inputs. i hooked everything up fine and did a drive ...
Summary: Hi, I have a question maybe someone experienced this before. I got Verizon DSL, it can go online fine without my router, but when I try to use my router with the DSL modem it doesn't work. And I teste...
0 
