I have a problem that is really annoying and i would really appreciate if someone could help me. Whenever I try to defragment my C Drive i get the blue screen with the following info: A problem has been detected and Windows has been shut down to prevent damage to your computer. IRQL_NOT_LESS_OR_EQUAL ... Tehnical Information : *** STOP: 0X0000000A (0X00000166, 0X00000002, 0X00000000, 0X804ECF8E) Beginning dump of physical memory Physical memory dump complete. After surfing a few hours on the net searching for an explanation i`ve found that the problem is that I have conflict(s) on my PC. I checked System Information and found 8 conflicts or whatever they are. Here is what Conflicts/sharing from System info is reporting: I/O Port 0x00000000-0x00000CF7 PCI bus I/O Port 0x00000000-0x00000CF7 Direct memory access controller I/O Port 0x000003C0-0x000003DF Intel(R) 82845G/GL/GE/PE/GV/E Processor to AGP Controller - 2561 I/O Port 0x000003C0-0x000003DF NVIDIA GeForce4 MX 440 Memory Address 0xD8000000-0xE7FFFFFF Intel(R) 82845G/GL/GE/PE/GV/E Processor to AGP Controller - 2561 Memory Address 0xD8000000-0xE7FFFFFF NVIDIA GeForce4 MX 440 Memory Address 0xE8000000-0xE9FFFFFF Intel(R) 82845G/GL/GE/PE/GV/E Processor to AGP Controller - 2561 Memory Address 0xE8000000-0xE9FFFFFF NVIDIA GeForce4 MX 440 IRQ 16 NVIDIA GeForce4 MX 440 IRQ 16 Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 I/O Port 0x00005000-0x0000FFFF PCI bus I/O Port 0x00005000-0x0000FFFF Intel(R) 82801DB/DBM SMBus Controller - 24C3 Memory Address 0xA0000-0xBFFFF PCI bus Memory Address 0xA0000-0xBFFFF Intel(R) 82845G/GL/GE/PE/GV/E Processor to AGP Controller - 2561 Memory Address 0xA0000-0xBFFFF NVIDIA GeForce4 MX 440 I/O Port 0x000003B0-0x000003BB Intel(R) 82845G/GL/GE/PE/GV/E Processor to AGP Controller - 2561 I/O Port 0x000003B0-0x000003BB NVIDIA GeForce4 MX 440 MY SYSTEM: P4 2,4 GHz, 512 DDRAM, GEForce MX 440, HDD 40 GB INTEL 845PE chipset PLEASE HELP ME!!!

The best place to get help for situation like this is here AumHa Windows Error Messages Center http://aumha.org/win4/kberrmsg.htm

Cosmin: some suggestions; do an error check on your drive before running defrag; 1. click Start, My Computer, right-click the selected drive. 2. choose Properties, Tools tab, click Check Now in the Error-Checking section. the second disk option includes the first option. if you check either option, then the scan will not start until the next startup. if you leave both options unchecked, then you can start the scan now. a NTFS formatted disk will automatically replace bad clusters and log all key file activity. boot using the F8 key into Safe Mode, then run defrag. if the 0x0A error persists, have a look at: http://support.microsoft.com/?kbid=183169 and http://support.microsoft.com/?kbid=314063 let us know what worked for you...