Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Error Reading SCSI Device
Name: Dave Date: December 2, 2001 at 04:13:07 Pacific
Comment:
I have a CanoScan 2700F connected to my SCSI card and my Canon Software reports the error reading the SCSI device. The hardware is installed and working correctly. From my investigations, it would appear that as XP does not install any ASPI.SYS or ASPI32.SYS files, that is the problem. Microsoft refer me to the Adaptec site for the files, yet Adaptec state that ASPI32.exe should NOT be installed on Win 2k or XP. Can anyone advise me on the best course of action?
Name: jimi_l Date: December 2, 2001 at 04:34:08 Pacific
Reply:
Dave That model was discontinued in 1999 and is not listed at Cannons site or the MS hardware compatibility site.I did find some XP drivers for some newer Canoscan film scanners that were XP compatable,perhaps give them a try. I think however you may be SOL Jimi_l
0
Response Number 2
Name: Evaristo Date: January 6, 2002 at 13:20:42 Pacific
Reply:
Dear friend, I have the same problem and I can't solve it. Have you found any solution? Thank you!
0
Response Number 3
Name: igor Date: January 8, 2002 at 23:32:27 Pacific
Reply:
On the pages of Canon Germany (http://support.canon.de/produkte/diascannertt.htm) they say, that the ASPI drivers are really needed and according to their tests - do not cause any problems ("...Bei den von uns durchgeführten Tests kam es nach der Installation des ASPI-Layers zu keinen Beeinträchtigungen des Systems."). So I have tried (downloaded ASPI32.exe from Adaptec), installed, rebooted and ... IT WORKS !
Summary: I Have a CanoScan 2700F. The hardware it's correctly installed but when I launch the Scancraft software it's impossible detect the scanner connected to the SCSI card "Error Reading SCSI devices". Any ...
Summary: Trying too install TD Warehouse Miner (Demo) and getting error 1305, error reading MSCOMCT2.OCX file. I looked in Windows\system32\ for the file but it does not exist. Can someone tell me where or how...
Summary: How can i enable or disable SCSI Device Parameters like Disconect or INT 13h or SYNC. Like i can in win9x in device manager. My complete systems acts like a 386 CPU when i use SCSI Devices. i think th...
0 
looking for modem driver ...
