Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Error on intel dg35ec motherboard
Name: anten Date: October 23, 2008 at 01:07:45 Pacific OS: NOT YET INSTALLED CPU/Ram: CORE 2 QUAD/4GB Product: intel/DG35EC
Comment:
MY SYSTEM IS AN ASSEMBLED ONE.IT HAS A CORE 2 QUAD PROCESSOR WITH 4 GB RAM AND IT IS NOT DETECTING MY CD AND DVD DRIVES AS I AM TRYING TO INSTALL MY XP OS "IT SAYS THAT NO OPTICAL DRIVES FOUND"
Name: Decker Date: October 23, 2008 at 02:45:10 Pacific
Reply:
have you bought the system pre-built?
if so, take it back.
or:
check the power and data cabling to the cd drive are both secure inside.
open BIOS and check that the drive is recognised and not disabled ; this will show up on the first screen in BIOS usually as IDE Channel 1, primary but any is fine. You should see the name of your drive as well as your hard drive located on these channels.
-D-
0
Response Number 2
Name: jam Date: October 23, 2008 at 05:13:45 Pacific
Reply:
"MY SYSTEM IS AN ASSEMBLED ONE"
1st of all, turn off the CAPS lock.
2nd, who assembled your system? It sounds like the jumpers weren't configured properly on the back of the optical drive(s).
"If my answers frighten you then you should cease asking scary questions" - Jules Winnfield (Samuel L. Jackson) in Pulp Fiction
0
Response Number 3
Name: kx5m2g Date: October 23, 2008 at 06:01:39 Pacific
Reply:
Are the optical drives IDE, SATA, a mixture of both ?
Summary: Might try starting a new post and tell us WHEN that message crops up. Also give us the Event ID number. You might just need to install an updated chipset utility. Try looking on Intel's website for yo...
Summary: Hey all. I've recently been having issues with installers. I'm running XP Home SP3, with the following System specs: Intel Q9550 6 Gb DDR3 RAM (Memory checks ascertained that these sticks worked, bu...
Summary: Every time I load Windows XP, there is a beep (from the internal speaker) and the error message: "Your system has no paging file, or the paging file is too small." I have tried the following solution,...
0 
