Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Error Code 7
Name: Frustated_Puppy Date: June 11, 2003 at 10:35:41 Pacific OS: Win XP Pro CPU/Ram: 512
Comment:
Upon new installation the following message is displayed:
File \i386\ntkrnlmp.exe could not be loaded Error code 7
Name: Toad Date: June 11, 2003 at 11:50:09 Pacific
Reply:
I would look toward your RAM as the issue.
0
Response Number 2
Name: MindsEye Date: June 11, 2003 at 12:33:50 Pacific
Reply:
You might also want to check your CD rom. I had the same issue last week. Ended up replacing the ram and the CD rom. After that the installation went smoothly.
HTH MindsEye
0
Response Number 3
Name: sunrise0205 Date: June 11, 2003 at 12:51:18 Pacific
Reply:
Hi, you can go to START>RUN and type: drwatson. They will tell you what your problem is. Good luck.
Summary: I get a error code 7 after i reboot and try to finish the XP install.. there error is listed below File setupdd.sys could not be loaded the error code is 7 Setup cannot continue press any key to exit ...
Summary: Hello people. Looking to restore my computer back to its factory conditions. The OS I am using is XP Pro SP2. I have tried installing XP Pro from the disk that I have but it does not want to respond...
Summary: Hi, I just purchased 512M DDR 2100 RAM. I replaced the 256M DDR 2100 RAM with the 512M. When I booted the system, Windows XP came up with Error code 7, unable to load the ntkno__.exe file. The BIOS...
0 
Graphics card & XP
