dram error

May 6, 2009 at 04:19:56
Specs: Windows XP, 512 mb
hi
today i met a BIG problem
i turned on the computer and after few seconds it crashed in the bsod
and started beeping(long)
i found out that the problem is dram error
but how to fix it?
any suggestions?
thanks in advance!:D:D:D

See More: dram error

Report •


#1
May 6, 2009 at 05:14:34
http://www.sysopt.com/tutorials/art...
BIOS Error Beeps, Messages, and Codes

1 long beep is shown at the bottom of the list as being
"POST passed no errors"

The DRAM thing is 1 beep (short) at the top of the list.
Do you have any other symptoms to say ????

Static electricity from your body can ruin the
sensitive electronic components in computers.
If you have been touching anything inside.

Mostly on Desktop computers----
DUST collects inside computers, and can cause hardware
damage, overheating, faulty fans, faulty drives
Is yours clean.????
http://www.makeitsimple.com/project...
^^^ Some pictures ^^^

Look for leaking or bulging capacitors on the motherboard.
http://www.pcstats.com/articleview....
^^^ Some pictures of them ^^^


Report •

#2
May 6, 2009 at 05:19:03
well...
the beeping doesn`t stop
the screen is black
what to do

Report •

#3
May 6, 2009 at 05:31:05
Laptop or Desktop computer ???

If a desktop, turn it off, remove all external hardware, look inside
for excessive dust and look for bad capacitors on motherboard.

Try computer ON without the external hardware attached.


Report •

Related Solutions

#4
May 6, 2009 at 05:35:02
well it`s a desktop computer
i have checked for dust and everything a few days ago
but, nope
again beeps
i removed the ram , mother board
i attached it again
still beeping

Report •

#5
May 6, 2009 at 06:01:37
Check to see that Case and/or CPU fans are running.

Then the P.S. Mostly a voltmeter would be used to check ---
http://www.howstuffworks.com/power-...
How PC Power Supplies Work

I would disconnect all non-essential hardware from the Power Suppy and the Motherboard. then power computer back on.
Any Beeps then ??? If not, then attach each piece of hardware one at a time, and testing for a beep by applying power on.

Beware that static electricity in your body can ruin computer parts.

I have about run out of suggestions. Watch for help from others.


Report •

#6
May 6, 2009 at 06:18:46
It would help if you provided some info about your system...make/model? The beeping pattern will give you a clue to the problem but you need to know which BIOS type you have...AMI, AWARD or Phoenix are the 3 most common.

Is it a constant beeping? any mix of short & long beeps or high/low tones?

http://www.pchell.com/hardware/beep...

http://www.computerhope.com/beep.htm

http://www.pcguide.com/ts/x/sys/bee...


Report •

#7
May 6, 2009 at 07:12:46
thank`s
i didn`t manage to resolve the problem
i`ll request help from others
have a nice day
:D:D:D:D

Report •


Ask Question