Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Code 10: new WD SATA 150 HDD
Name: Agamemnon Date: November 22, 2006 at 16:10:50 Pacific OS: Win XP Pro SP2 CPU/Ram: Athlon XP 2600 Barton 333
Comment:
I just installed a Western Digital Caviar RE WD2500YD 250GB 7200 RPM 16MB Cache Serial ATA150 Hard Drive and I plugged it into my SATA150 connection on my ASROCK motherboard (listed in signature) and installed everything correctly (so i think). When I turned on the system, i checked My Computer and the new hdd hadn't popped up. I looked in Device Manager, and my VIA SATA RAID Controller has a "This device cannot start. (Code 10)" error.
Did I fail to see a missing jumper (though i don't believe the motherboard has a hardware configuration option/jumper for it? Is it a software issue with the VIA driver i already installed?
Any suggestions?
Asrock K7VT6 SocketA MB Athlon XP 2600 Barton 333mhz FSB 1024MB 3200DDR 40gb ata133 7200rpm ide 120gb ata133 7200rpm ide Sound Blaster Audigy LS
Name: per Date: November 22, 2006 at 16:13:34 Pacific
Reply:
Did you install the sata drivers?
0
Response Number 2
Name: mattie Date: November 22, 2006 at 16:16:01 Pacific
Reply:
MSKB says:
This device cannot start. (Code 10)
Recommended resolution
Device failed to start. Click Update Driver to update the drivers for this device. On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard.
Today's subliminal thought is: 'Calm down ... it's only ones and zeros.'
0
Response Number 3
Name: Agamemnon Date: November 22, 2006 at 16:28:24 Pacific
Reply:
i actual figured it out.
I wasn't using it in a RAID array, so i configured the jumpers #5 & #6 together so it will work as an independant volume.
Thanks for the replies!
Asrock K7VT6 SocketA MB Athlon XP 2600 Barton 333mhz FSB 1024MB 3200DDR 40gb ata133 7200rpm ide 120gb ata133 7200rpm ide Sound Blaster Audigy LS
Summary: I get the code 10 message when trying to connect my Freecom FHD-XS 20GB portable HDD When plugging in, the system recognizes that it is a FHD, but then the installation fails and in Device manager it ...
Summary: I have win xp pro and have been trying to install a saitek cyborg 3d usb gold. I have downloaded all the necessary drivers and i'm still getting device was not installed and under device manager i get...
Summary: I am new to this board but was referred by a friend that thought someone might be able to help. I built a new machine about 2 years ago, loaded it up with XP Pro and all seemed fine. In January, I u...
0 
