Win98 log on NT domain
|
Original Message
|
Name: Calvin
Date: April 5, 2000 at 15:14:08 Pacific
Subject: Win98 log on NT domain
|
Comment: is there any way can Win 98 log on NT domain ? .. i went to Control Panel/Networking and double clicks on( client for M-soft Network ) .. i put a check mark on ( Log on to Windows NT domain ) and type my NT domain down there... TCP/IP option .. i type my NT domain in ( domain ).. host is my computer name.. WINS is empty .. IP/Subnet Mask were given that was working good on Peer-to-peer Network before ... then i reboot my PC ... after the windows log on then ask me the networking password and i type the pw .. a few seconds later i got a massege pop up ( No domain server was available to validate your password. You may not be able to gain access to some network resources). please help me to solve this pbl... thanks for your time. Calvin
Report Offensive Message For Removal
|
|
Response Number 1
|
Name: Jim
Date: April 5, 2000 at 16:19:05 Pacific
|
Reply: (edit)Calvin, Do you know which machine on your network is the domain controller? Can you see it in Network Neighborhood? Jim
 Report Offensive Follow Up For Removal
|
|
Response Number 2
|
Name: Gurkan
Date: April 6, 2000 at 00:36:28 Pacific
|
Reply: (edit)Calvin, Can you also try to ping the Domain controller. And if you receive a reply then try remove your computer from the domain and then join it again just by making it a member on a workgroup... Gurkan
Report Offensive Follow Up For Removal
|
|
Response Number 3
|
Name: LM-S
Date: April 6, 2000 at 12:32:50 Pacific
|
Reply: (edit)
http://www.helmig.com aka http://www.wown.com
is a useful place for a complete step-by-step how to do it all... Extremely useful resource to have around, as an aide memoire...
Report Offensive Follow Up For Removal
|
|
Response Number 4
|
Name: John
Date: April 7, 2000 at 21:10:05 Pacific
|
Reply: (edit)I'm having the same problem as you have Calvin. Response 1 and 2 did not really answered the question. Response 3 gave us a good site for troubleshooting. I hope someone can help us to solve this problem.
Report Offensive Follow Up For Removal
|
|
Response Number 5
|
Name: Hsia Huang
Date: April 13, 2000 at 14:34:09 Pacific
|
Reply: (edit)Do you know if you have PDC? You must have PDC (Primary Domain Controller) SERVER up and running and make sure that you have a user profile setup for you in order for you to login. It looks like you have a peer to peer setup and no NT 4.0SERVER with PDC to validate your login. Hope this helps.
Report Offensive Follow Up For Removal
|
|
Response Number 6
|
Name: Jerry Spence
Date: July 15, 2000 at 01:10:52 Pacific
|
Reply: (edit)I have been rolling out NT Domain on a number of Win98 PCs at a customer's site. I have just three PCs which won't play ball. I can ping the controller, it also has DHCP, which is working fine and providing these PCs with IP addresses, DNS, gateway etc. It simply can not find the Domain Controller for password verification. I am baffled!
Report Offensive Follow Up For Removal
|
Use following form to reply to current message:
