Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Setting dhcp client without control pannel under nt
Name: HDC Date: February 7, 2001 at 06:11:26 Pacific
Comment:
Does anyone know how to avoid using the GUI on the Control Panel to go from fixed IP to DHCP Client?
Name: MLM Date: February 9, 2001 at 01:54:48 Pacific
Reply:
I think you can do this as follow : 1) Make sure "DHCP client is running with "net start" command. If not, activate that service with the command : net start "DHCP Client". 2) right click on "network neighborhood" then select "properties". Choose "protocols" tab, select "TCP/IP protocol" and "properties" again. Check "Obtain an address IP from a DHCP server". You'll have to reboot the machine. Hope this will help you
Summary: I am trying to change from static ip to dhcp client by changing values in the registry. Setting EnableDHCP, IPAddress, and SubNetMask are not enough(they are enough when going from dhcp to static ip....
Summary: Use the resources tab in NT diags to see IRQ settings. DHCP client should start automatically if TCP/IP is installed.Otherwise you can start it from services. To use DHCP go to Network-Protocols-sele...
Summary: Foud this on the subject, Hope it helps! PROBLEM The following error occurs when trying to start DHCP client in Windows NT services Could not start the dhcp client on//file server error 2140:internal...
0 
