Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
PC Anywhere on NT server
Name: Richard Date: September 1, 2000 at 03:43:15 Pacific
Comment:
Hi,
I'm trying to configure PC anywhere on my NT server - it works fine when dialling out of the server into my PC, but when I try and dial in the modem responds, starts handshake, and then cuts me off. I have tried writing modem events to the log, but no help here (doesn't say anything).
Some questions :
1) Do I need RAS installed to make PCA work? 2) I have tried both PC anywhere and NT security - anything else?
I am assuming that there is an issue somewhere with the authentication process, but seeing as there is no documentation available on this subject I am a bit lost.
Name: Kohath Date: September 1, 2000 at 07:53:08 Pacific
Reply:
Are the users dialing into PC Anywhere or the actual server. If the users are dialing into the server, the RAS service must be installed and configured.
0
Response Number 2
Name: Richard Date: September 4, 2000 at 01:52:51 Pacific
Reply:
Well, that's kind of the problem - I don't know. PC anywhere is installed as a host on the server and running as a service, so I assume it is over riding the server security, but as I do not understand the relationship between PCA and NT security I'm not entirely sure.
0
Response Number 3
Name: Richard Date: September 8, 2000 at 04:57:17 Pacific
Reply:
Ras has to be installed and the user has to be given the ras rights
Summary: A problem with mapped drive letters on nt server: When NT-Server is started, it has two mapped drives. This is ok. After an undefined time there are all other previous free drive letters are mapped to...
Summary: We had a similar problem on our server. We found that when you RE-INSTALL PC AnyWhere on the server, then reboot, it should work fine. Let me know how it goes! dbresle@broadandcassel.com ...
Summary: How would I upgrade the hard drive on a NT server. I want to copy/clone the whole exisiting drive. Drive copy apparently doesn't work on NT server. Can ghost handle the fact that it will placed on a l...
0 
