I need a "choice-funktion" in a batchjob in NT. What can i do.! ? !

with lots of pleasure,i need to know where i can fine or get myself the windows NT server installation setup disks 4.0 version for my personal use.i will be greatful if you can give a helping hand. thanks

Here you go, an example of my own: config.sys [Menudefault]=Windows,10 [Menu] menuitem=Dos menuitem=Windows menuitem=Clean [Dos] DEVICE=C:\DOS\SETVER.exe DEVICE=C:\DOS\HIMEM.SYS DEVICE=C:\DOS\EMM386.exe NOEMS DOS=HIGH COUNTRY=031,850,C:\DOS\COUNTRY.SYS DEVICE=C:\DOS\DISPLAY.SYS CON=(EGA,,1) DEVICE=C:\CDPRO\VIDE-CDD.SYS /D:MSCD001 DEVICE=C:\NET\IFSHLP.SYS STACKS=9,256 FILES=60 LASTDRIVE=Z [Windows] DEVICE=C:\DOS\SETVER.exe DEVICE=C:\WINDOWS\HIMEM.SYS DEVICE=C:\WINDOWS\EMM386.exe NOEMS DOS=HIGH COUNTRY=031,850,C:\DOS\COUNTRY.SYS DEVICE=C:\DOS\DISPLAY.SYS CON=(EGA,,1) DEVICE=C:\CDPRO\VIDE-CDD.SYS /D:MSCD001 DEVICE=C:\WINDOWS\IFSHLP.SYS FILES=60 STACKS=9,256 LASTDRIVE=Z [Clean] DEVICE=C:\DOS\SETVER.exe DEVICE=C:\DOS\HIMEM.SYS COUNTRY=031,850,C:\DOS\COUNTRY.SYS DEVICE=C:\DOS\DISPLAY.SYS CON=(EGA,,1) STACKS=9,256 FILES=60 LASTDRIVE=Z autoexec.bat @echo off prompt $p$g PATH C:\WINDOWS;C:\DOS;C:\NET SET TEMP=C:\TEMP IF "%CONFIG%"=="Dos" GOTO DOS IF "%CONFIG%"=="Windows" GOTO WINDOWS IF "%CONFIG%"=="Clean" GOTO CLEAN :CLEAN MODE CON CODEPAGE PREPARE=((850) C:\DOS\EGA.CPI) MODE CON CODEPAGE SELECT=850 Goto End :WINDOWS C:\WINDOWS\net start C:\DOS\SMARTDRV.exe /X MODE CON CODEPAGE PREPARE=((850) C:\DOS\EGA.CPI) MODE CON CODEPAGE SELECT=850 C:\WINDOWS\MSCDEX.exe /S /D:MSCD001 /V /L:E echo ............ echo. pause Press any key to Start Windows... Win Goto End :DOS MODE CON CODEPAGE PREPARE=((850) C:\DOS\EGA.CPI) MODE CON CODEPAGE SELECT=850 Echo Running NetWerk Configuration... set path=c:\net net initialize netbind.com umb.com tcptsr.exe tinyrfc.exe nmtsr.exe emsbfr.exe net start Echo Ready to Run Network. PATH C:\WINDOWS;C:\DOS;C:\NET SET TEMP=C:\TEMP C:\DOS\MSCDEX.exe /S /D:MSCD001 /V /L:E Goto End :End Good luck with it ;-) Need help, let me know!!