Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
NIC Card
Name: Heather Perez Date: May 26, 2000 at 13:01:50 Pacific
Comment:
My nic card is automatically detected when installing WinNt4.0, but the second the machine boots up for the first time I get two messages in the event viewer. EL90X1: Has encountered a conflict in resources and could not load. (Event ID 5000) And... 3com 3c90x adapter driver service failed to start due to the following error: A device attached to the system is not functioning. (EVENT ID 7000)
Go to Start, Programs, Administrative Tools, WinNT Diagnostics. Check the resources tab to determine if the IRQ or I/O settngs for the card are conflicting with another device. If there is a conflict, use the driver software to attempt to set the card to a non conflicting value...
My nic card is not automatically detected when installing WinNt4.0, and when startinq I get this message in the event viewer. 3com 3c90x adapter driver service failed to start due to the following error: A device attached to the system is not functioning.
Summary: I am wondering about putting 2 NIC cards on one NT server. Each NIC would be connected to a seperate LAN. Can this work? WIll the server be able to keep track of which LAN is senting info, and can i...
Summary: Does anyone know how to install a 3Com 3C509b-TPO card in a DOS 6.22 machine... I have an old DOS machine that connects to a Novell 4.11 server...which then runs an old DOS accounting program... I hav...
Summary: I have two NIC cards installed, 1 for internet access, the other for intranet access. I get online fine but I cannot log onto my local network. I can be 'seen' on my local network, but nothing more. I...
0 
