hi guys! i need the manual of this motherboard how to use jumpers ..and so on .. if you can orient me i'll be much ablidge. my problem is that i have put a pI 233 (socket 7) on board but recognize only as 166??? my next question is that when i put a 128 sdram 168 pin in one of the slots i get only 32 ram in the bios configurations.???? unfortunally under the specs of the motherboard in http://www.compucraftinc.com/dfi/586ipvg.html there is no manual or how to use the jumpers have any suggestions??

Be more specific. Just how is your question related to the Windows NT operating system? Someone on this forum might show some sympathy, but you might be better served to find a hardware forum, I believe. I'm seeing lots of questions out front with (0) responses. I believe it's because many of us aren't getting any less busy in the real world.

James: Please check out this link: http://pc-info.hypermart.net/message/2.html

i have a amd k6-2-550mhz chip in a fic va-503+ motherboard all the settings are setup for it but it reads as a 531mhz please help thanks

For P 233 MMX Jumper Configuration. Processor-Speed Freq. JP1 1-2 3-4 5-6 7-8 9-10 11-12 off on off off off off Voltage JP2 1-2 3-4 5-6 7-8 off off off on JP3 1-2 3-4 off on JP4 1-2 on