Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
ISA RS232 serial port card (SIIG)
Name: Doug Cvelbar Date: April 19, 1999 at 10:01:15 Pacific
Comment:
(OS: NT4.0 service pack 4)(Serial card - SIIG high IRQ) -> I installed a two port serial card (16550 uarts) to give myself two more ports. I set the card jumpers for (open resources) COM3/IRQ10 and COM4/IRQ11. After booting I looked at the event viewer and found two errors stating that my control registers were overlapping between 2 and 3 for the first error and 3 and 4 for the second error. No matter what changes I make (ie. changing IRQs, port setup in NT control panel, Jumpers on the board, cmos settings ...) I still get these two errors in the event viewer. Everything else seems to be fine. There are no messages of conficting IRQs and my modem(com2) and mouse(com1) work fine. Any suggestions!?
Summary: Anyone out there know of a good utility for changing serial port addresses and irq's My basic problem is that I have conflict between com1 and com3 (different address but the same irq number) and com2...
Summary: Hi, I have a Dell Latitude CPxJ system with WinNT 4.0 OS installed. I have a Xircom Ethernet+Modem Card installed in this system. The Ethernet Port of the Xircom Card works ok. But The Modem Port does...
Summary: I'm having trouble with NT workstation and a software pkg which detects it compatible hardware on the COM1 serial port. I know it has worked before. I recently disconnected the device to repair it a...
RAS; No Domain avaliable ...
