I just installed NT Workstattion 4 on my pc. Installed the drivers..when i go into EvenLog, i see this message ----------------------------------------- A conflict has been detected between two drivers which claimed equivalent IRQs. Driver Elnk3, with device <\Device\elnk31.Translated>, claimed an interrupt with Level in data address 0x28, vector in data address 0x2c and Affinity in data address 0x30. --------------------------------------- I am not very familiar with NT, but i did look under NT diagnostic, and i don't see whatelse it trying to use the same irq ...any suggestions ?? Thank you

Hi Sergey, I have never had this before but I would delete the NIC and all related and reinstall that part of the network. It looks like that there is a confict with the Etherlink board and maybe a second etherlink NIC

I would go the Microsoft Site and see in tech net by typing the exact error message. I had a similar error about 6 months back and solved it through the MS technet article. There is a conflict (overlap) of address space claimed by two drivers.

Ron is correct. If you are having irq problems and can't find the conflict on nt diagnostics then you might have the wrong driver. try looking for an updated driver. I had this problem last week and I found out my nt server was installing a later version of the driver.