Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
"Could not load DHCP"
Name: Joe W. Date: September 12, 2000 at 11:10:12 Pacific
Comment:
I work with a company that uses a Netfinity 3500 server w/NT 4.0 installed. When they boot up the system, an error message appears telling them that DHCP did not load. What do we do to fix this problem. They also are experiencing a problem with one of their workstations not automatically assigning an IP address to it.
Name: Kohath Date: September 13, 2000 at 06:28:22 Pacific
Reply:
Is the server running DHCP, if so take it off immediately all servers should have static ips. on the workstation side, remove tcp/ip reinstall it and assign a static ip address that has been excluded on your dhcp settings. If that works and you want to be adventuresome, switch the settings back to obtain and see what happens. Most of the time that clears up the problem. Make sure that you have dhcp set up where you can track who gets what ip address.
Summary: I have a network where a win2k machine is the dhcp server and shares files and internet access through a hub to the other computers. The other computers are a few win98 and a winxp. This setup usually...
Summary: aarrrhhh!!!! when my NT server boots it logs on as Administrator and then hangs for a couple of minutes i then get the error message: the DHCP client could not obtain an ip address it then goes to the...
Summary: Been trying to install NT Server 4.0 on a Dell Dimension XPS D300. No matter what I do, the setup stops with "ntkrnlmp.exe could not be loaded. Error code is 4". Why is it even trying to load the mult...
0 
