Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Name: Dr. Zhivago Date: June 9, 2001 at 21:32:39 Pacific
Reply:
START -> Settings -> Control Panel-> System -> Devices
You need to resolve resource (e.g. IRQ, I/), DMA) conflicts between the floppy controller and another hardware device in your system.
Sometimes all you need to do is reset the default configuration.
Try disabling other hardware devices one at a time. When you can reboot and the floppy controller runs okay, you know you've isolated the offending device driver. Then all you have to do is change the configuration for the offending hardware device and you'll be back in Suffragette City ;-)
Summary: I am installing NT 4.0 on a Dell GX110 computer and upong finishing the install the system does not see the floppy drive. This machine has a removable hard drive and when I inset another drive that i...
Summary: My NT Server cannot see any of our 95/98 clients through network neighbourhood...entire network. However, all our 95/98 clients can see the whole network, including my NT Server, perfectly! My NT Serv...
Summary: The Data Link Layer of the OSI model is ok as you can receive IP address info using ICMP! As is the Network and Transport layers as you are receiving a reply from you PING's.. All is ok with you setti...
0 
