Vache error after memory upgrade
|
Original Message
|
Name: sharon1968
Date: February 9, 2004 at 05:12:17 Pacific
Subject: Vache error after memory upgrade OS: winMe CPU/Ram: 128
|
Comment: I upgraded my memory chip from 2 64 sdramm PC133 chips to a sdramm 265 PC133, now I get a vache error and the system shuts down or just freezes up. What would cause this? I know the chip is good becasue after this failure I put it in my other compter and it worked fine.
Report Offensive Message For Removal
|
|
Response Number 1
|
Name: Leroi
Date: February 9, 2004 at 05:35:35 Pacific
Subject: Vache error after memory upgrade |
Reply: (edit)Can your pc handle a 256MB chip? Some cannot, you need to check system specs for maximum per slot.
Report Offensive Follow Up For Removal
|
|
Response Number 2
|
Name: Wawadave
Date: February 9, 2004 at 09:15:01 Pacific
Subject: Vache error after memory upgrade |
Reply: (edit)hello did you at some point set the vache settings in m.e? its useally in trev,s twaeks perhapps you need to change this. i have info for if your adding more than 512 megs but where and how would be the same Name: WhitPhil Date: October 28, 2002 at 09:56:17 Pacific Subject: Insufficient memoery to run DOS pro Reply: It is a file cache issue when you get above 512. Do Start > Run > System.ini Scroll to the [vcache] section and add the line MaxFileCache=512000 Save, exit and reboot shows vchache size and physical memory size http://home.plutonium.net/~bjackson/ ====================================================================================== http://support.microsoft.com/default.aspx?scid=kb;en-us;253912 ••• Resistance is invigorating! •••
Report Offensive Follow Up For Removal
|
Use following form to reply to current message: