Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
USB port won't work
Name: Bjarne Mjelde Date: June 19, 2003 at 15:00:42 Pacific OS: ME CPU/Ram: 233/96
Comment:
I have an old Toshiba 490CDT with a USB port that won't work - it simply doesn't respond to any USB device connected to it. Previous owner used Win NT which I understand doesn't support USB, but I ran fdisk and formatted the disk and installed ME from scratch. Funny thing is, I can connect a USB 2.0 card into the PCMCIA slot and it works fine - except the machine freezes on shut-down if a USB disc is installed and is not removed prior to shut-down. I would like to have the original USB port working though. No indications of irregular behaviour on the Device Manager.
Summary: I bought a Canon S100 printer with an USB cable. Before the Canon I used an Epson 480 printer with a parallel cable. When I install the programm for the Canon, the programm says that it can't detect t...
Summary: Right, this is causing me to go mad. My PS/2 Mouse port won't work with any mice I put in there. Even bought a new mouse, no luck. I have an ols PS/2 mouse with some bent pins within the plug itself, ...
Summary: WHEN I LOAD EVERYTHING INTO THE COMPUTERAND GO TO USE THE SCANNER I GET OPEN DS FAILED, COMMUNICATION ERROR. EVERYTHING IS HOOKED UP RIGHT.I HAVE A DELL 4100 866MHZ PETUIUM 3 PRECESSER, 128MGS OF RAM....
ME Slow on But, only when...
