Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Machine won't boot with the USB plug in?
Name: ZTracker00 Date: July 15, 2002 at 18:13:03 Pacific
Comment:
Machine: 750mhz AMD 280 mbs of RAM with Win ME
Hi...
Has anyone also had this problem? I would appreciate any input.
The machine won't boot when I have the USB plug in. It'll go to the bios screen and freeze. When I pull the USB plug out it boots normally. (note* the USB plug that I have in goes to a stand alone 60 gig USB drive.)
Name: Make ME Date: July 15, 2002 at 22:29:50 Pacific
Reply:
Hmmm your best bet, would be to double check and make sure your USB Card is in tight, if it's the USB port that came built into the computer, then I have no clue. lol If you can get into windows. Then try re-installing Drivers for it. They can usually be found on motherboard CD.
Make ME
0
Response Number 2
Name: thegorx Date: July 15, 2002 at 23:03:32 Pacific
Reply:
go thru your bios setting I assume this is onboard usb? check for anything like usb drive support or having it listed as a boot drive in the line up.
I had a zip drive with a fic ad11 board that had something like usb drive support or some damn thing. The only thing it could do is to have the zip drive in safe-mode as a generic removable drive. other than that it just caused problem.
so look for any other usb settings other than the enable usb.
other than that I guess just don't have it plugged in at boot up.
Summary: Below is a problem I posted 1 day ago. I since have some new info to ad to it. ..................................... My system: 750 mhz 280 mb ram AMD Duron ECS K7SEM Mobo with updated ...
Summary: Hi everyone... System: Win ME Gateway PIII 950 512mb ram Adaptec ava-2906 scsi card Minolta Dimage Multi Scan II (film scanner) PROBLEM: Computer used to boot with the scanner on and attached (scanne...
Summary: I have a Compaq Presario and two hard drives. The 8GB drive is where WinMe (upgraded from the resident Win95) is loaded. The machine won't boot up. ScanDisk tells me there are FAT errors on C:. I ...
0 
